Sensors

Overview The Pololu AltIMU-10 v5 is a compact (1.0″ × 0.5″) board that combines ST’s LSM6DS33 3-axis gyroscope and 3-axis accelerometer, LIS3MDL...

PL-2739

Are you itching for an easy way to mount a PSP-like thumb joystick to your project? This Analog Mini Thumbstick Breakout Board will help you do jus...

AF-3246

Sometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Luckil...

AF-2765

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LIS3MDL three-axis digital magnetic sensor; we therefore recommend care...

PL-2737

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LSM6DS33 inertial module, which features a 3-axis digital linear accele...

PL-2736

Note: This product does not include electrodes; they are available separately in packs of six. To use the sensor, an electrode must be connected t...

PL-2732

PIR motion sensor with quarter for size reference. Overview The passive infrared detector senses motion of infrared light sources at the sam...

PL-2731

Overview This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with internal resistances that in...

PL-2730

Overview This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with internal resistances that in...

PL-2729

0.6″-diameter short-tail force sensing resistor (FSR) next to a 0.6″-diameter FSR with a standard tail. Overview This force-sensing resisto...

PL-2728

The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temper...

SF-SEN-14049

Overview This board is a compact (0.4″ × 0.8″) carrier for ST’s LPS25H MEMS absolute pressure sensor, or barometer; we therefore recommend car...

PL-2724

Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, ligh...

AF-1202

Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, ligh...

AF-1203

The Spectacle Audio Board allows you to add sound from a microSD card to your Spectacle projects. Each board accepts a microSD card with sounds in ...

SF-DEV-14034

Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they’re often unreliable or ...

SF-SEN-14585

Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they’re often unreliable or ...

SF-SEN-14518

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-794

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-793

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-792

Add precise capacitive touch, distance sensing and high quality audio to your Raspberry Pi A+, B+, Zero and later (any Raspberry Pi with a 40 pin G...

AF-3224

This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface which ...

SF-SEN-10345

This sensor incorporates two QRE1113 infra-red reflectance sensors on a single PCB, spaced just the right distance apart to build a line following ...

FT-REFLECT

The Spectacle Inertia Board makes it easy to sense motion or orientation with a Spectacle project. The Spectacle Inertia Board is designed to allow...

SF-DEV-13992

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-723

Remote temperature sensing for your Arduino! Connect this to your board and point it at a surface or heat source to remotely measure its temperatur...

FT-IRTEMP

Measure location, altitude, and speed using your Arduino and this module. Simple serial interface with full Arduino library support. Onboard backup...

FT-GPS

This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing app...

SF-SEN-10128

This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing app...

SF-SEN-10127

This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 MEMS gyro. With this board, you get a full 6 degrees of freedom. The senso...

SF-SEN-10121

The Walabot Developer is a programmable 3D sensor inside a protective enclosure that looks into objects using radio frequency technology. This...

SF-SEN-14535

The Walabot Starter is a small, programmable sensor tool that looks into objects using radio frequency technology that breaks through known ba...

SF-SEN-14534

Note: This encoder is not compatible with our HPCB micro metal gearmotors (the HPCB motor terminals are too large to fit the corresponding PCB hol...

PL-2591

A highly sensitive barometric pressure sensor for weather, industrial, rocketry, balloon, and many other pressure sensing applications. The sensor...

FT-BARO

What do you get when you power a layer of liquid crystal material sandwiched between two sheets of glass? A Liquid Crystal Light Valve (a.k.a a LCD...

AF-3330

The SparkFun RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into th...

SF-SEN-09963

The HRLV-MaxSonar-EZ sensor line is the fastest way to get precision range-finding into your computer. No microcontroller or adapter required, simp...

AF-1343

The APC220 radio module provides a simple and economic solution to wireless data communications. Integrates an embedded high speed microprocesso...

DF-TEL0005

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the tw...

SF-SEN-13715

This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, ...

DF-DFR0018

This URM05 Ultrasonic Range Finder is Discontinued Now, We recommend URM04 Ultrasonic Sensor as a suitable replacement. The DFRobot URM...

DF-SEN0003

The MyoWare LED Shield is designed to pair with the MyoWare Muscle Sensor. The blue 10-segment bar graph shows the magnitude of the measured signal...

SF-DEV-13688

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at lef...

DF-DFR0029-Y

Sharp’s GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diago...

SF-COM-09689