SparkFun Australia

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off t...

SF-PRT-10462

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off...

SF-PRT-10461

The Arduino Uno is the undisputed champion of all development boards, why would you not want to keep your board safe and sound inside this black op...

SF-PRT-12839

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the tran...

SF-WRL-12823

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up blue! So now you can get ...

SF-COM-10443

This is a simple LED-illuminated tactile button with a red cap. It’s just like a basic tactile button, but it lights up red! So now you can get vis...

SF-COM-10442

The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connectivity into your proj...

SF-WRL-12820

This is a simple LED-illuminated tactile button with an orange cap. It’s just like a basic tactile button, but it lights up orange! So now you can ...

SF-COM-10441

This is the BC127, a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. Each module comes preloaded with B...

SF-WRL-12819

This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between ea...

SF-PRT-12807

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get...

SF-COM-10439

This is the Mindwave Mobile from NeuroSky, an EEG headset that safely measures and transfers the power spectrum (alpha waves, beta waves, etc) data...

SF-SEN-12805

This is a thermal printer like you would find on a cash register or adding machine. It will print simple strings passed to it via TTL serial, bitma...

SF-COM-10438

Every super spy has a small compact camera at their disposal just to get the advantage on the bad guy and though you may not be a “00” this high re...

SF-SEN-12804

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. ...

SF-RTL-10423

Dustyn Roberts' Making Things Move is a wonderful introduction to practical mechanics. This book teaches you the basics of building moving mechanis...

SF-BOK-10394

This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflec...

SF-SEN-12785

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends....

SF-PRT-10372

The SparkFun EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to eight strands of elec...

SF-COM-12781

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends...

SF-PRT-10369

This is the Exofabulatronixx 5200 MOSS Ultimate Kit, an incredibly fun kinematic robot construction system from Modular Robotics. Exofabulatronixx ...

SF-KIT-12778

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends....

SF-PRT-10366

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the tran...

SF-WRL-12775

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends...

SF-PRT-10364

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends....

SF-PRT-10362

The RFM12BSP is a great inexpensive option for wireless communication; it’s an ISM band FSK transceiver module implemented with a unique PLL. These...

SF-WRL-12770

At our current size, it’s inevitable that there will be some waste in production. This is a grab bag of some of the parts that have fallen off the ...

SF-DD-10351

This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface which ...

SF-SEN-10345

If you’re looking for a chassis base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with a hall...

SF-ROB-10336

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of max...

SF-ROB-10333

Running out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use i...

SF-DEV-12761

Create distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and XBee radios. By the time yo...

SF-BOK-10324

These digital (LH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them fo...

SF-PRT-12754

A really cool rechargeable Lithium Ion coin cell battery. The battery is rated for 3.6V @ 110mAh - a great way to run a small embedded project for ...

SF-PRT-10319

This is a common SMD barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1m...

SF-PRT-12748