SparkFun Australia

Make you Raspberry Pi 4 seriously cool with the Fan SHIM from Pimoroni! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch w...

SF-PRT-15708

The W25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins, and power. This small SMD IC series of...

SF-COM-15809

This is a tiny USB Microphone from Kinobo that plugs into your laptop, desktop, Raspberry Pi, Jetson Nano Dev kit, anything with a USB port you may...

SF-COM-14125

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is...

SF-CAB-15463

The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, all without taki...

SF-SEN-15440

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development...

SF-DEV-15446

The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather...

SF-SEN-15441

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 ...

SF-CAB-15426

This is a 150mm (~6") long, 10-conductor cable that's especially ideal for many JTAG applications. Both ends are terminated with 2x5 pin female con...

SF-CAB-15364

Is it power you seek? With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet! The ...

SF-DEV-14713

The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous weather kits we...

SF-KIT-15301

The OpenMV H7 Camera is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the rea...

SF-SEN-15325

Having a broken phone or electronics device stinks, whether it's a screen going out, a cable becoming unplugged, or even a more severe issue that w...

SF-TOL-15255

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether ...

SF-DD-15333

Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmware that wast...

SF-COM-15290

The Raspberry Pi PoE (Power over Ethernet) HAT is a small accessory board for the Raspberry Pi computer. The PoE HAT allows you to power your Raspb...

SF-DEV-14882

The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fract...

SF-GPS-15246

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate...

SF-SEN-14722

This simple adapter wire terminates on one end with a JST-PH Male connector, and a JST-SM Female connector on the other. It can be used as a bridge...

SF-PRT-14707

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other. Alligator clips are a staple...

SF-CAB-15186

This is a basic 16 button keypad that has been designed for easy user input and functionality. The buttons are set up in a matrix format which allo...

SF-DD-14881

This breakout board makes it easy to use the tiny MMA8452Q accelerometer communicate over I2C in your project. The MMA8452Q is a smart low-pow...

SF-SEN-14587

Normal GPS antennas are optimized for the US based GPS reception which is great but with more and more modules capable of tracking additional const...

SF-GPS-14986

Color your world with this MegaPack of multi-colored circuit stickers. This LED sticker pack from Chibitronics is a set of 30 individual red, yello...

SF-DEV-14594

Let your geek shine with this five pack of rainbow colored NFC LED nail stickers. These nifty little things power themselves when in a capable devi...

SF-SEN-14888

The Pixhawk 4 is an advanced development kit for the PX4 autopilot and is the latest update to the family of Pixhawk flight controllers. The flight...

SF-ROB-14841

Is your I2C bus not ACK'ing the way you expect? Do you need to discover a UART’s mysterious baud rate? Or do you want to reverse engineer an SPI pr...

SF-SPX-14789

The Power Dock 2 allows you to use any 3.7V LiPo battery to power your Omega and then charge the battery when it’s out of juice. Utilizing the same...

SF-DEV-14440

The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-ba...

SF-DEV-14352

The TFMini Plus is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters (+/- 5cm up to 6m)...

SF-SEN-15179

The WFV3918 from Amp'ed is a small footprint, low cost RF video module, supporting 720p video resolution, both live streaming and SD card storage, ...

SF-WRL-15124

The VEML6075 UV Light Sensor Breakout is SparkFun’s latest ultraviolet sensing solution. The VEML6075 implements a simple photodiode to measure the...

SF-SEN-15089

The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ...

SF-SEN-15112

Let’s face it, everyone will need a screwdriver at some point so it is best to be as prepared as possible by having plenty of different driver bits...

SF-TOL-15003

This high-gain FPC (flexible PC) antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands.This duck antenna works...

SF-CEL-15053

For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data, and st...

SF-COM-15107

The PI22TAT5R5G5B-2427 is a mouthful, but it’s also an addressable RGB LED in a very small 2.4x2.7mm package. This four pin IC uses standard 5V/GND...

SF-SPX-15085

This simple adapter wire terminates on one end with a JST-PH Female connector, and a JST-SM Female connector on the other. It can be used as a brid...

SF-PRT-14999

The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini. In addition to all the usual features tha...

SF-DEV-14483

These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick con...

SF-CAB-14576

The SparkFun ProtoSnap is an Arduino-compatible development platform aimed at teaching the basics of Arduino programming as efficiently as possible...

SF-DEV-10889

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a stapl...

SF-CAB-14303

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for othe...

SF-PRT-14429

Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks…but what if...

SF-KIT-14409

The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connec...

SF-DEV-14328

A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connection...

SF-BOB-09322