SparkFun Australia

The STA540 from STMicro is a 4-channel, class AB audio amplifier designed for high quality sound applications. The four independent channels makes ...

SF-COM-09557

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12451

These hub mounts mate directly to Actobotics channels in multiple positions and are useful as attachment points for shafts and tubes with a 0.5" di...

SF-ROB-12450

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12449

These clear yellow precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are...

SF-ROB-12448

These blue precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal f...

SF-ROB-12447

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12446

These wheel adaptors allow you to adapt 17mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket he...

SF-ROB-12445

This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package. All pins of the L298N are br...

SF-BOB-09540

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs h...

SF-ROB-12443

This is a replacement soldering tip for our 30W Soldering Iron. This is a conical type of soldering tip, and is the same version that originally co...

SF-TOL-09538

These plastic shaft spacers have an inner diameter of 3/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12441

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a ...

SF-ROB-12440

These 2" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12439

The KTA-223 Relay Board is a USB or RS485 controlled module that can interface a PC to eight or more SPDT relays. This could be very useful for con...

SF-DEV-09526

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12438

These heavy duty wheels have a diameter of 6” and a width of 1”. They have a hard inner plastic core and a smooth outer rubber tire. These wheels u...

SF-ROB-12437

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12436

NOTE: THIS SOLDERING IRON IS HAS A US PLUG AND IS NOT COMPATIBLE WITH AUSTRALIAN POWER OUTLETS.This is a very simple fixed temp, quick heating, 30W...

SF-TOL-09507

This is a 3-terminal microswitch, with a small push-button. This switch has a great ‘clicky’ sound to it, and a nice tactile feel. Features: Max...

SF-COM-09506

These quad hub mounts can attach to the end or the middle of Actobotics channels to provide you a 90 degree angle with additional attachment points...

SF-ROB-12433

These 5" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12432

This screw plate gives you the ability to attach a ¼-20 machine screw to Actobotics channels. It has 8 6-32 tapped holes around the edge, and a ¼-2...

SF-ROB-12431

This is the new, weather resistant, field-hardened WR1 from Maxbotix. The XL series of this sensor features higher resolution, longer range, higher...

SF-SEN-09496

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a ge...

SF-ROB-12430

The XL series of MaxSonars are a super high-performance version of the easy-to-use sonar range finder from Maxbotix. The XL series of this sensor f...

SF-SEN-09495

These 4" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12428

The XL series of MaxSonars are a super high-performance version of the easy-to-use sonar range finder from Maxbotix. The XL series of this sensor f...

SF-SEN-09494

These 6" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12427

These blue “skate” wheels have an outer diameter of 2.975”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the ska...

SF-ROB-12426

The XL series of MaxSonars are a super high-performance version of the easy-to-use sonar range finder from Maxbotix. The XL series of this sensor f...

SF-SEN-09491

These blue precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal f...

SF-ROB-12425

The BNC probe kit includes a 20MHz professional probe with hook and tip as well as a couple converters to connect the probe to either a BNC jack, R...

SF-CAB-09486

This kit includes everything you need to make your very own capacitance meter, able to measure caps anywhere between the range of 500uF to 1pF. Man...

SF-KIT-09485

These zinc-plated socket head machine screws are 3/8” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

SF-ROB-12423