SparkFun Australia

These orange precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal...

SF-ROB-12422

These ½" bore hub spacers allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. These hubs utilize the 0.77" hole...

SF-ROB-12421

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12420

These 8" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating...

SF-ROB-12419

This is a basic, 4-digit 7-segment display - blue in color. It has a common anode. The display features one decimal point per digit, and individual...

SF-COM-09481

These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 24 teeth with a gear pitch of 32P, an outer diameter of...

SF-ROB-12418

These threaded aluminum clamping hubs are perfect for standard applications that need shafting or tubing 1" in diameter secured safely. These clamp...

SF-ROB-12414

These aluminum double servo hub arms can bolt directly to the aluminum hub on servo power gearboxes via four 6-32 x 3/8" machine screws. Each doubl...

SF-ROB-12413

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12412

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12411

The WIZ110SR is a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gauging, managing and control of TCP/IP devices throu...

SF-DEV-09476

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12410

This is a very simple, clear infrared LED. These devices operate between 840-850nm and work well for generic IR systems including remote control an...

SF-COM-09469

These gray “skate” wheels have an outer diameter of 4.90”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the skat...

SF-ROB-12409

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 5:1 and operate up to 12 volts and have a stall...

SF-ROB-12408

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used t...

SF-ROB-09457

The Aluminum Clamping Motor Mount is great for applications where the perfect motor alignment is needed. When used in conjunction with a gearmotor ...

SF-ROB-12407

These 10" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when ...

SF-ROB-12406

The LM358 is a great, easy-to-use dual-channel opamp. Opamps have so many applications we figured we should probably carry at least one in a DIP pa...

SF-COM-09456

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12404

These lipped Rubber Rings have an inner diameter of 2.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement ...

SF-ROB-12403

These 6" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12402

This is a low-power dual axis (pitch and roll) MEMS gyro with a ±30°/s maximum range. Options include integrated low pass filters and embedded powe...

SF-COM-09446

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12399

This is a high quality AC to DC ‘wall wart’ which produces a regulated output of 12VDC at up to 600mA. These are switch mode power supplies which m...

SF-TOL-09442

Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 1/2” bore for shafts. These bearing mounts have a width ...

SF-ROB-12397

These red precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal fo...

SF-ROB-12396

Resonators function like crystals, but are a lower cost solution that does not require external caps. These resonators are +/-0.5% or better from ...

SF-COM-09420

These 8" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12395

These 12" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

SF-ROB-12394

This is a unique board recommended by a SparkFun customer. When playing with microSD, you sometimes need to view what the SPI traffic is doing, whe...

SF-TOL-09419

These zinc-plated socket head machine screws are 1-¼"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64...

SF-ROB-12393

These 2" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12392