SparkFun Australia

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12275

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs ...

SF-ROB-12274

There are already many I2C devices in the wild. The Qwiic adapter converts the standard I2C pinout (GND, 3.3V, SDA, and SCL) to the 4-pin 1mm JST c...

SF-SPX-14237

These 10" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

SF-ROB-12273

This “boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable b...

SF-ROB-12272

This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 pack...

SF-PRT-09194

This swivel mount works in conjunction with the clamping swivel motor mounts (see below). A ¼-20 lock-nut holes the motor in place, while 6-32 tapp...

SF-ROB-12271

The Xcelite Ergonomic Screwdriver Set provides six different screwdrivers, each featuring a shockproof ergonomic soft inner core and handle. Utiliz...

SF-TOL-14234

These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12269

These 6" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12268

These round pillow block bearing mounts attach to the outside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These beari...

SF-ROB-12267

This is a replacement soldering tip for the Weller WLC100 soldering iron. Each conical-type tip measures 0.031" (0.79mm) wide. Replacing the tip is...

SF-TOL-14231

This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a flat type of soldering tip, measuring 0.125" (3.17mm) wide. Repla...

SF-TOL-14230

These channel brackets (C type) provide you with an attachment point for a channel mountable gearbox kit. They share the same 0.5" center hole and ...

SF-ROB-12266

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 64 teeth with a ge...

SF-ROB-12265

This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features: ...

SF-COM-09179

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12264

This is a replacement soldering tip for the Weller Portasol Butane Soldering Iron Kit. The double-flat type tip is 1mm wide. Replacing the tip is a...

SF-TOL-14227

These 1" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12263

The Weller Portasol Kit is a fantastic box filled with a pocket-sized, butane-powered soldering iron as well as multiple attachments for it. Each s...

SF-TOL-14226

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12262