SparkFun Australia

These orange precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal...

SF-ROB-12210

These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an outer diameter of 3.125”, a bor...

SF-ROB-12209

These 2" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mat...

SF-ROB-12208

Power on the go? Why didn’t you ask? We’ve got plenty! These portable, rechargeable lithium ion battery packs are simple, compact and make for a gr...

SF-TOL-14167

These hub-mountable aluminum sprockets can be used to drive wheels or other sprockets with 0.25” chain. They have 16 teeth with a spacing of 0.25”,...

SF-ROB-12207

This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel 1 mOhm shunt resistor...

SF-SEN-09028

These simple 24AWG wires are terminated with a female insulated spade connector at one end and a braided wire lead at the other. Each wire is 3 fee...

SF-CAB-14166

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 84 teeth with a ge...

SF-ROB-12206

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 150:1 and operate up to 12 volts and have a sta...

SF-ROB-12205

This simple 24AWG wire is terminated with a male JST connector at one end and a male JST-SM connector at the other. Each wire is a foot long and is...

SF-CAB-14165

These clear precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12204

The BeagleBone Black Wireless is a low-cost, credit-card-sized development platform with good support from a fast-growing community. Replacing the ...

SF-DEV-14162

If you used BlinkM and you thought it was good, but needed something to temporarily blind your enemy, the MaxM is what you need. Three large 10mm L...

SF-COM-09000

This is a strip of five TXB0108 SMD ICs, which function as bidirectional voltage level translators, from Texas Instruments. These 8-bit noninvertin...

SF-DD-14159

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12202

These black precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12201

These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut. Sold in single ...

SF-PRT-08993

This servo plate provides a mounting ring for your ¼-sscale servo. Four 6-32 tapped holes hold the servo in place, while 12 holes surrounding the p...

SF-ROB-12200

This is a high-quality “wall wart” AC to DC 6V 2,000mA Barrel Jack wall power supply manufactured specifically for SparkFun Electronics. These are ...

SF-TOL-14158

This hub adapter lets you connect Actobotics parts with a 0.77" hub pattern to parts with a 1.5" hub pattern. The holes for the 1.5" pattern altern...

SF-ROB-12199

This is a Ding and Dent version of our Raspberry Pi B Block for the Intel® Edison. This block has headers pre-soldered on, which means we were not ...

SF-DD-14157

The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit ...

SF-GPS-08975

The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to contr...

SF-DEV-14155