SparkFun Australia

This SparkFun Artemis SnowBoard is a limited edition version of the RedBoard Artemis.  Think of the Artemis SnowBoard as just another Arduino... Th...

SF-DEV-15839

This is the PICkit 4, the official programmer from Microchip. The PICkit 4 allows debugging and programming of PIC®, dsPIC®, AVR, SAM and CEC flash...

SF-PGM-15797

Why use a heatsink and a case, when you can use a heatsink case?! This green, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C ...

SF-PRT-15895

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up ...

SF-BOB-15932

This is a 12 inch servo extension cable that comes in handy when your servo is further away from the controller than the wire on the servo allows. ...

SF-ROB-15808

The SparkFun Inventor's Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino programm...

SF-KIT-15631

Have you ever needed to monitor your yogurt in the community fridge because there’s a yogurt thief loose at work? Or have you ever needed the light...

SF-SPX-15804

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs.

SF-CAB-00502

This USB Power Meter is a versatile little tool that can provide voltage readings down to 0.01V and current to 0.001A, displayed on the built-in co...

SF-TOL-15571

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and inclu...

SF-CAB-15455

The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely ...

SF-DEV-15442

According to some of our engineers, if you hold this Qwiic Arcade switch up next to your ear, you can hear the sounds of Pac-Man scrolling across t...

SF-SPX-15591

This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a rangin...

SF-SEN-15569

The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner vi...

SF-DEV-15316

TRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRS stands for "Tip, Ring, Sleeve." ...

SF-COM-15438

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 ...

SF-CAB-15425

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or j...

SF-PRT-15307

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or j...

SF-PRT-15306

This is a 5 foot (~1.5m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital communicati...

SF-CAB-15308

So much power and light from such a small package. This 3W per channel, Triple Output High Power RGB LED is sure to shed a lot of light on any proj...

SF-COM-15200

The SparkFun Qwiic system is expanding greatly. But we understand there are other systems out there. The Qwiic to Grove cable allows interoperabili...

SF-SPX-14739

Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you hav...

SF-SEN-14607

PaPiRus Zero is an ePaper / eInk screen HAT designed for the Raspberry Pi Zero and the Raspberry Pi Zero W. It’s one of the first true low power di...

SF-LCD-14826

The TinyFPGA BX is a small field-programmable gate array (FPGA) board with all of the components and circuitry required for the FPGA to function, p...

SF-DEV-14829

Sensirion’s SHTC3 digital humidity sensor builds on the success of their SHTC1 sensor. The SHTC3 has a broader supply voltage range (1.62V to 3.6V)...

SF-SPX-15074

The SparkFun Papa Soundie is an audio playback device breaking out VS1000D audio codec IC allowing this little board the ability to decode OGG...

SF-DEV-14554

The SparkFun Little Soundie is a fun and easy-to-use audio playback device breaking out the VS1000D audio codec IC allowing this little board ...

SF-DEV-14006

This is a simple knob that connects to the small and medium sized linear slide potentiometers. Each knob uses friction to secure itself to fit onto...

SF-COM-14889

This version of the APA102C (or “DotStar”) is the regular, 5050-sized (5mmx5mm) SMD LED. With an integrated control circuit embedded, the APA102C-5...

SF-COM-14863

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 blue 5mm LEDs will help allev...

SF-COM-14562

USB C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into ...

SF-CAB-14909

This is the 2N5191G, an NPN silicon transistor. This little transistor can help in your project by being used to help drive large loads or amplifyi...

SF-COM-13951

Want to improve your GPS antenna multipath convergence time performance to near survey-grade GNSS levels? Just using this simple steel plate effect...

SF-GPS-15004

Increase your range with this ½ wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and ...

SF-WRL-14876

A small ¼ wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA conn...

SF-WRL-14875

A smooth sea never made a skilled sailor, so start learning how to solder with this kit! With this Lighthouse soldering kit you will be able to lea...

SF-KIT-14635

It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors c...

SF-SEN-14844

Everyone knows and loves the Raspberry Pi, but what if the wireless capabilities only got better? The Raspberry Pi 3 B+ is here to provide you with...

SF-DEV-14643

These are simple flush cutters from Excelite that give you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good...

SF-TOL-14782

This LCD Touchscreen HAT fits snuggly on top of the Raspberry Pi, practically form fitting on top of it so as not to compromise the over all dimens...

SF-LCD-14776

Arduino and Arduino compatible dev boards are an awesome tool for developing an idea quickly but, being development boards, they’re often a little ...

SF-SPX-14804

The SparkFun Inventor’s Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino program...

SF-KIT-14418

The Arduino MKR1000 is a powerful board that combines the functionality of an Arduino Zero and a handy WiFi shield. This thin board has been design...

SF-DEV-14394

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the ...

SF-GPS-14414

The SparkFun ESP32 Thing Plus is the next step to get started with Espressif IoT ideations while still enjoying all the amenities of the original E...

SF-WRL-14689

The future is here! The SparkFun Qwiic Transparent Graphical OLED Breakout allows you to display custom images on a transparent screen using either...

SF-LCD-15173

The SparkFun Proximity Sensor Breakout is a simple IR presence and ambient light sensor utilizing the VCNL4040. This type of sensor is often seen i...

SF-SEN-15177

These are high quality, general purpose, Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devi...

SF-COM-15207