SparkFun Australia

This is a single pole, 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our other rotary switch, thi...

SF-COM-13253

No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for ef...

SF-ROB-13207

Testing surface-mount components with standard test leads is anything but easy. Everyone has their own method: some people tackle it with teamwork ...

SF-TOL-11060

This is the Standard Gripper Kit A, a simple and durable robotics kit that is great for “getting a grip” on pretty much any robotics project! Desig...

SF-ROB-13174

This is an IC Test Clip for 8-pin small outline integrated circuits (SOIC). This test clip assures a secure connection to all chip leads on an 8-pi...

SF-COM-13153

This female barrel jack plug is great for adding a common connector to the end of wires. This jack is compatible with 5.5x2.1mm barrel connectors. ...

SF-PRT-13126

The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals start with a...

SF-PRT-13124

The Spectrum Shield enables your Arduino with the capability of splitting a stereo audio input into 7-bands per channel. You can then read the ampl...

SF-DEV-13116

So much power and light from such a small package. This 5 pack of “Warm” white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any pr...

SF-COM-13104

Schottky diodes are known for their low forward voltage drop and a very fast switching action. This 1A 40V Schottky diode is ideal for use with mot...

SF-COM-10926

Simple shrouded 6-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of connection. 2...

SF-PRT-10877

A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep within a project. Fe...

SF-COM-10860

If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard, you may consider these SIL-packaged resistors as a...

SF-COM-10855

This is the ActoBitty 2 from Actobotics, an easy to assemble starter robotics kit that is perfect for beginning builder. This little kit, once asse...

SF-ROB-13047

This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The Spark...

SF-BOB-13021

Who doesn’t love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with...

SF-COM-10801

We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED....

SF-COM-12999

This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz b...

SF-SEN-10740

Metal long standoffs: 1" long x ¼" OD. Used to get your proto board up off the table. #4-40 thread. Fits most development boards with available hol...

SF-PRT-10738

It seems like everything plugs in to your computer these days, and this digital multimeter is no exception. This auto-ranging multimeter will test ...

SF-TOL-12967

This is a breakout for the SOIC version of the 74HC595 shift register IC. Clock in data and latch it to free up IO pins on your micro. All pins fro...

SF-BOB-10680

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply pr...

SF-PRT-10651

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow. Features: 587-591nm Yellow...

SF-COM-10634

This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with fri...

SF-PRT-10592

Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The SparkFun Musical Instrument...

SF-DEV-10587

This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fa...

SF-PRT-12899

The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communicatio...

SF-DEV-12898

What should every hacker have available to them? That’s right, a screwdriver (you have to get into those cases somehow). What makes screwdrivers ev...

SF-TOL-12891

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These co...

SF-PRT-10501

You don’t have the power? Well, there’s no need to ask Scotty – the SparkFun Benchtop Power Board Kit has your back. This board will let you take a...

SF-KIT-12867

This charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. It will handle LiPo/LiFe up to 6S and NiMH/NiCd...

SF-PRT-10473

Note: This camera case does not currently fit the Raspberry Pi Camera Module V2. We are currently looking for a resolution to this issue. The Raspb...

SF-PRT-12846

Standard Philips-head 4-40 screws. They are ½" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout b...

SF-PRT-10452

If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, ...

SF-SEN-12829

This is a simple LED-illuminated tactile button with a green cap. It’s just like a basic tactile button, but it lights up green! So now you can get...

SF-COM-10440

The Panavise Jr. is a great vise with a vacuum base. Its jaws open up to about 3" and have grooves for PCBs. It’s perfect for light duty field repa...

SF-TOL-10410

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female head...

SF-PRT-12795

This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected lig...

SF-SEN-12784

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends...

SF-PRT-10370

The SparkFun Logomatic v2 takes everything we learned with logging analog or serial data from your projects over the years and boils it down to an ...

SF-WIG-12772

This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We...

SF-ROB-10335

This small breakout board couples an Electret microphone (100Hz–10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knoc...

SF-BOB-12758

If you use your hobby knife a lot, chances are you will need extra blades. These #11 blades are very sharp and good for trimming all sorts of thing...

SF-TOL-10325

This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart low-power, three-axis, capacitive...

SF-SEN-12756

This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your...

SF-SEN-10245