SparkFun Australia

The LilyPad ProtoSnap Plus Kit is an all-in-one e-textile prototyping kit that has been specifically designed to make it as easy as possible t...

SF-DEV-12922

Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, rig...

SF-BOB-11187

The pyboard is a compact and powerful electronics development board that runs MicroPython. It connects to your PC over USB, giving you a USB flash ...

SF-DEV-14413

The SparkFun Adjustable LiPo Charger is a single-cell lithium polymer (LiPo) and lithium ion battery charger. Because it’s adjustable, this ch...

SF-PRT-14380

Introducing a revolutionary set of accessories that converts your Raspberry Pi into a desktop computer. WiFi, Bluetooth, RTC, mSATA SSD interface a...

SF-DEV-14354

The 1Sheeld+ is an easily configured shield for Arduino. It has a built-in Bluetooth Low Energy (BLE) module that gives to your Arduino the capabil...

SF-CEL-14333

Let’s say “what’s up” to the Watt’s Up Meter! The Watt’s Up is an all-in-one digital DC ammeter and watt, watt-hour and amp-hour meter. Watt’s Up m...

SF-PRT-14331

The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W. This kit consists of parts t...

SF-KIT-14329

You might know RFID as the technology that Big Brother uses to track your every move. Quickly, don the tinfoil hats!! Only kidding. RFID is useful...

SF-COM-14325

These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to y...

SF-PRT-14322

The JustBoom DAC HAT is a plug-and-play, high-resolution, digital-to-analog converter for the Raspberry Pi. Simply stack the plug-and-play add-on b...

SF-DEV-14319

The JustBoom Digi HAT is a high-resolution digital audio output add-on board for the Raspberry Pi. Simply stack the plug-and-play add-on board (HAT...

SF-DEV-14317

Measuring air quality includes the necessity to determine the amount of dust or particulate matter (PM) in the air. Dust is not so bad but really s...

SF-SPX-14309

The micro:bit Educator’s Lab Pack includes 10 micro:bit boards and everything you need to get you started with the new learning platform. The Lab P...

SF-LAB-14302

The Raspberry Pi Zero W can be a bit tricky to set up with its unique power and cable requirements. That’s where this kit comes in. The SparkFun Ra...

SF-KIT-14298

The L293DNE is a PTH quadruple, high-current, half-H driver IC. These ICs have been designed to provide bidirectional drive currents of up to 600mA...

SF-DD-14297

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12350

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12348

ServoBlocks increase a servo’s load-bearing capabilities by helping to isolate the lateral load from the servo spline and case. The extreme versati...

SF-ROB-12347

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast...

SF-DEV-14285

These 1" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12322

This S-Type load cell (sometimes called a strain gauge) can translate up to 200kg of pressure (force) into an electrical signal. Each load cell is ...

SF-SEN-14282

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12 volts and have a stal...

SF-ROB-12316

The STEMTera is an innovation in breadboard history. It is the first breadboard with an Arduino-compatible hardware suite built in that works with ...

SF-DEV-14279

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND...

SF-COM-09288

The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires ...

SF-DEV-09281

USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to have limit...

SF-CAB-14276

It’s not what project you have in mind that may use a rocket launch switch… The question is what project will you come up with once you have one in...

SF-COM-09278

This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED, generate ton...

SF-COM-09273

This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 MEMS accelerometer from Analog Devices, the LilyPad Accelerometer c...

SF-DEV-09267

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2...

SF-ROB-09238

This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage ...

SF-SEN-09196

The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible with a spring-loaded ...

SF-TOL-14235

The Solder-Mate™ Solder Dispenser provides you with an easy way to, well…dispense solder! This handy tool provides a continuous supply of solder (u...

SF-TOL-14232

This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a standard type of soldering tip, measuring 0.062" (1.58mm) wide. R...

SF-TOL-14229

The WLC100 from Weller is a versatile 5 watt to 40 watt soldering station that is perfect for hobbyists, DIYers and students. The WLC100 operates a...

SF-TOL-14228

This is a high-quality, easy to use 28 pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high conductivit...

SF-PRT-09175

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards....

SF-PRT-09174

We love games! We love writing games, building games and, yes, even building game consoles. That’s where the SparkFun micro:arcade kit for the micr...

SF-KIT-14218

Robots are fun, and the micro:bit is the perfect controller for learning how to build and program robots! Combining the micro:bit with the SparkFun...

SF-KIT-14216

900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. The FC...

SF-WRL-09143

This is a heavy-duty joystick very similar to the ones in claw arcade games. Directional movements are momentary limit switches - one for each dire...

SF-COM-09136

Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a 5-pin JST connectors ...

SF-GPS-09129

This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module ma...

SF-GPS-09123

These hub-mountable aluminum sprockets can be used to drive wheels or other sprockets with 0.25” chain. They have 32 teeth with a spacing of 0.25”,...

SF-ROB-12240

The Type 5 Pocket Geiger Radiation Sensor from Radiation Watch is a highly sensitive radiation sensor designed for the embedded systems market. Cap...

SF-SEN-14209