SparkFun Australia

This is a small board for prototyping through-hole components with the LilyPad system. There are an array of pins all shorted together with 10mil t...

SF-DEV-09102

The GPS Mouse is a combination GPS and Compass in a self contained module perfect for UAV and autonomous vehicle enthusiasts. The The GP-808G insid...

SF-GPS-14198

The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a white on black...

SF-LCD-09067

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert t...

SF-COM-14196

This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is wi...

SF-LCD-09053

Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set ...

SF-KIT-14180

These are two pin jumpers (also called shunts) that will create an electrical connection between two pin headers. Commonly used to modify settings ...

SF-PRT-09044

This is a 3-foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the 3.5mm audio-style co...

SF-CAB-14164

Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.

SF-PRT-08995

This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LAN...

SF-CAB-08915

This ball caster kit from Pololu includes a black ABS housing, a 3/8" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw set...

SF-ROB-08909

The DAQCplate (Data Acquisition and Controller) from Pi-Plates adds a rich set of input/output options to your Raspberry Pi. It includes seven powe...

SF-DEV-14148

This custom-designed plastic wheel from Pololu has a silicone tire measuring 1.26" (32 mm) in diameter and is designed to fit the output shafts on ...

SF-ROB-08901

Standard 22 AWG stranded white wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for p...

SF-PRT-08866

Through-hole 24.5 mm coin cell holder. This holder fits our rechargeable 24.5mm Lithium Ion coin cell battery. Holds battery in place with friction...

SF-PRT-08863

Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocker switch to help you o...

SF-COM-08837

These pinion gears attach to a ¼” D-shaft or gear motor using a setscrew. They have 16 teeth with a gear pitch of 32P, an outer diameter of 0.563”,...

SF-ROB-12158

These are resistant XL sized timing belts that fit snug inside of the Actobotics timing pulleys. Each belt is made out of neoprene with fiberglass ...

SF-ROB-12156

This is a very simple but handy, 2" square, double sided perf board. Standard 0.1" spacing with a 4-40 (3mm) holes for mounting. Great for quickly ...

SF-PRT-08811

This is a 150W single output switching power supply from Mean Well. This power supply is extremely reliable and able to output 12VDC at 12.5A. We’v...

SF-TOL-14099

Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone’s diagonal cutters for a minute, but you’d better ask before tou...

SF-TOL-08775

These aluminum channels are the building blocks to the Actobotics line and function as the back bone to your electromechanical project. These chann...

SF-ROB-12122

The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into the case with four screws, ...

SF-PRT-14059

This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to us...

SF-WRL-08666

This is a simple 5mm LED with an interesting array of applications. This UV LED can be used for counterfeit detection (bills, credit cards, documen...

SF-COM-08662

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability...

SF-COM-08582

Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 e...

SF-PRT-08534

It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requireme...

SF-SEN-14032

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any co...

SF-DEV-08467

The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to happen to it. Why not prot...

SF-PRT-14025

This is the BITalino ( r )evolution Board Kit, a (comparatively) low-cost biomedical data acquisition dev board that allows you to create projects ...

SF-DEV-14022

Odometers are extremely useful for cars, they tell you how far you have gone, wouldn’t it be nice if you were able to have a device that does the s...

SF-BOB-12052

The LilyPad Simple just got a whole lot… simpler. We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with ...

SF-DEV-12049

This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light, the stronger the base bias. Simple to...

SF-COM-08348

This high gain, 7.75" antenna is perfect for AVL applications where cellular reception is a must. Connector is regular SMA so don’t confuse it with...

SF-CEL-08347

This is not your basic 7-segment display. The Dual 7-Segment Display features two digits with an RGB LED in every single segment! You will now have...

SF-COM-13999

This low-cost (LC) Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield featu...

SF-DEV-13996

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to p...

SF-PRT-08100

These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. Thi...

SF-PRT-08077

The nRF52832 is Nordic Semiconductor’s latest multiprotocol radio System on Chip (SoC). It’s half microcontroller, with a list of features includin...

SF-WRL-13990

These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. Thi...

SF-PRT-08074

These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. Thi...

SF-PRT-08073

DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as general control switches. ...

SF-COM-08034

These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision before it really happe...

SF-SEN-11999

The SparkFun Beginner Parts Kit is a small container of parts frequently used by beginning (or even experienced) hobbyists that gives you all of th...

SF-KIT-13973

The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. Passive infrared (PIR) sensor...

SF-SEN-13968

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching swi...

SF-COM-11973