SparkFun Australia

Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really ...

SF-DEV-11711

Microsoft and SparkFun have teamed up to bring you some IoT (Internet of Things) fun. The Microsoft Azure IoT Starter Kit for the SparkFun Thing De...

SF-KIT-13799

The SparkFun LED Array is a set of 56 red LEDs arranged in a nice 8x7 grid. This little board requires eight pins while the library supports any AT...

SF-COM-13795

This is a very large row of high quality machine pin headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general ...

SF-PRT-00117

Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their ph...

SF-WRL-13794

This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into you...

SF-WRL-11697

A staple for the electrical engineer. I can’t tell you how many times I’ve been one clip short! Note: Sold as a single unit.

SF-PRT-00111

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each ...

SF-COM-00105

These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay’...

SF-COM-00100

The µOLED-128-G2 is a compact display module from 4D Systems using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embe...

SF-LCD-11676

The SparkFun Battery Babysitter is an all-in-one single-cell Lithium Polymer (LiPo) battery manager. It’s half battery charger, half battery monito...

SF-PRT-13777

Electrolytic decoupling capacitors 100uF/25V. These capacitors are great transient/surge suppressors. Attach one between the power and ground of yo...

SF-COM-00096

Particle’s IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has...

SF-WRL-13764

These are ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 1K Ohm resistors make excellent pull-ups, p...

SF-COM-13760

The SparkFun AutoDriver board is based on the STMicro L6470 dSPIN stepper motor driver. This powerful chip allows you to control a stepper motor wi...

SF-BOB-13752

The SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you’ll nee...

SF-GPS-13750

In 2015 we developed the BadgerStick as a fun and interactive way for people to learn about soldering and engage with SparkFun products at the mult...

SF-DEV-13741

This 7" Raspberry Pi Touchscreen LCD provides you with the ability to create a standalone device that can be utilized as a custom tablet or an all-...

SF-LCD-13733

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-f...

SF-BOB-13717

  We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesme...

SF-COM-11557

 We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmeri...

SF-COM-11556

The MyoWare Power Shield is designed to take two standard CR2032 coin cell batteries to power the MyoWare Muscle Sensor. We have made this board i...

SF-DEV-13684

The SHT15 Breakout is an easy to use, highly accurate, digital temperature and humidity sensor. This board has been fully calibrated and offers hig...

SF-SEN-13683

If you do anything with electronics, you’re probably already using transistors, but you’re probably using them in large, prepackaged clusters of ju...

SF-KIT-13682

The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taki...

SF-SEN-13676

USB is being implemented as a power connection standard more and more these days, but you don’t always have a computer on hand so how are you going...

SF-TOL-11456

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colo...

SF-COM-11450

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold sta...

SF-GPS-13670

Have you ever wanted your project to just “hibernate” until someone picks it up or moves it? It’s a great strategy for dramatically extending the b...

SF-SEN-11447

Wanna play with EL wire but don’t know where to start? This Starter Kit has everything you need to add some electroluminescent fun to your project....

SF-RTL-11421

This is the SparkFun MiniGen Signal Generator, a small shield for the Arduino Pro Mini that is capable of generating sine, square, or triangle wave...

SF-BOB-11420

For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm 4-digit 7-...

SF-COM-11409

For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm 4-digit 7-...

SF-COM-11407

For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm 4-digit 7-...

SF-COM-11406

We know what you’re thinking, “What’s the big deal? Looks like an SD card…” Well this is no SD card! The Electric Imp is a WiFi enabled development...

SF-WRL-11395

Are you a Java developer looking to add advanced hardware I/O capabilities to your Android or PC application? Well then the IOIO-OTG is for you! Th...

SF-DEV-13613

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic ...

SF-COM-11372

This is Atmel’s high performance, low power 8-bit AVR ATMega328 microcontroller in a pint-sized TQFP package. Yes, you really can solder that. Not...

SF-COM-13448

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that...

SF-DEV-13343

This is the Big Red Box! These beefy, bright red, flanged, plastic enclosures will give your widget the protection (and attention) it deserves. You...

SF-PRT-11366

No, this kit won’t help you scan for Larsons. The Larson Scanner kit is actually named after Glen A. Larson, the man responsible for producing both...

SF-KIT-11365

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load...

SF-SEN-13332

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of...

SF-COM-13326

The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and installed into our Big Red...

SF-DEV-13317

Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 3.0 is a voice recognition shield for Arduino boards integrating an E...

SF-COM-13316

The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital te...

SF-SEN-13314

The Teensy is an amazing development platform that allows you to get more computing power than an Arduino Uno, and in less space. The Teensy 3.1 XB...

SF-BOB-13311

The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due...

SF-BOB-13303