SparkFun Australia

This is a SparkFun exclusive! These are 155mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any boa...

SF-PRT-08430

These are addressable 1-meter-long 5V RGB LED strips that come packed with 60 APA102Cs. APA102 LEDs are very similar to WS2812s with a few caveats:...

SF-COM-14015

These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the...

SF-COM-08285

The SparkFun 9DoF Razor IMU M0 combines a SAMD21 microprocessor with an MPU-9250 9DoF (9 Degrees of Freedom) sensor to create a tiny, reprogrammabl...

SF-SEN-14001

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing du...

SF-BOB-08276

The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. This shield features...

SF-DEV-13995

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to p...

SF-PRT-08095

The Genuino 101 is a learning and development board that delivers the performance and low-power consumption of the Intel® Curie module with the sim...

SF-DEV-13984

Standard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08027

Standard 22 AWG solid Gray hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08025

Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08024

Dip sockets for all your prototyping needs. If you’ve ever had to de-solder a dip part from a circuit board, you know how valuable these are! Numbe...

SF-PRT-07939

Dip sockets for all your prototyping needs. If you’ve ever had to de-solder a dip part from a circuit board, you know how valuable these are! Numbe...

SF-PRT-07937

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary sw...

SF-COM-11966

This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath t...

SF-COM-07835

These are our new and improved flush cutters, giving you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good, ...

SF-TOL-11952

These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 8-pin male headers. This is...

SF-PRT-11895

Replacement:CAB-11301. We now have branded USB cables! They’re “SparkFun Red” and have the flame logo embossed on the connector, sweet. This page i...

SF-CAB-00598

The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC...

SF-BOB-13906

This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM31...

SF-COM-00595

Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.

SF-PRT-00552