SparkFun Australia

The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V...

SF-COM-21337

This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our...

SF-CAB-21739

The SparkFun 1.8V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V...

SF-COM-21338

The SparkFun SAM-M10Q GPS Breakout features the SAM-M10Q chip-antenna module from u-blox©. The M10Q line is the successor to u-blox's M8Q found on ...

SF-GPS-21834

The SparkFun Qwiic Wireless Speaker Kit provides you with everything you need to make a wireless audio speaker. In order to save you as much time a...

SF-KIT-21773

This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one...

SF-CAB-21740

This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cel...

SF-SEN-21669

The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality stereo codec with 1W Stereo Class D speaker drivers and headphone drivers. Th...

SF-BOB-21772

The SparkFun NINA-B306 Thing Plus offers a unique combination development platform in the Thing Plus form factor featuring the NINA-B306 from u-blo...

SF-WRL-20854

The SparkFun Blues Wireless MicroMod Starter Kit is the easiest way to get started with the Notecarrier Cellular Function Board and provides every ...

SF-KIT-21702

The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge, because it integrates Syntiant’s powerf...

SF-SEN-21219

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you cou...

SF-CAB-21272

Does your Arduino need to control a high voltage item, like a 12V LED strip, while needing to be powered as well? Do you want to avoid having multi...

SF-SPX-19799

This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12. The lens produces a 5MP picture with a 18° field of...

SF-SEN-21334

The SparkFun Notecarrier Cellular Function Board adds a cellular modem to the MicroMod ecosystem using the Notecard - NOTE-NBGL-500 from Blues Wire...

SF-WRL-20409

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you cou...

SF-CAB-21271

The Kitronik Inventor's Kit for the Raspberry Pi Pico offers the perfect introduction to physical computing with the Pico. This Inventor's Kit cont...

SF-KIT-21504

The compact Simply Servo board for Raspberry Pi Pico allows for up to 8 servos to be controlled simultaneously, making it ideal for advanced roboti...

SF-ROB-20040

The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the Vesper VM2020 analog microphone. The VM2020 is an ultra-high Acoustic O...

SF-BOB-21537

The SparkFun 5V BabyBuck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage rang...

SF-COM-21256

The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage range of...

SF-COM-21255

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 2.5W, 4 Ohm speaker is only 28mm...

SF-COM-21311

The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1015 Air Velocity Sensor, Artemis, and Qw...

SF-KIT-21310

The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1005 Air Velocity Sensor, Artemis, and Qw...

SF-KIT-21309

The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality stereo codec with 1W Stereo Class D speaker drivers and headphone drivers. Th...

SF-BOB-21250

The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor fr...

SF-SEN-21262

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a handy select...

SF-KIT-20120

The SparkFun STTS22H Micro Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sen...

SF-SEN-21273

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while y...

SF-CAB-21281

A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Feat...

SF-WRL-20856

Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes. Utilizes an SMA connector and is 200mm long with a...

SF-WRL-20855

A first for the Raspberry Pi ecosystem: A 64MP camera module that matches the specs of smartphone cameras. The Arducam 64MP Camera Module puts a 64...

SF-SEN-21276

The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordi...

SF-DEV-21251

The SparkFun MicroMod Teensy Processor with Copy Protection leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M...

SF-DEV-18771

The GT-NUCL1633K1 is the latest miniature fingerprint sensor with extensive enhancements on power consumption and user flexibility from ADH-Tech. I...

SF-SEN-21210

Have you ever reached into a drawer of antennas and wondered what the frequency was for each of them? Now with this antenna frequency sticker sheet...

SF-SWG-20712

The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with ...

SF-DEV-21247

The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with ...

SF-DEV-21247

This is a simple 3-pin male SMD right angle header. Each pin can even be broken apart if you only need one or two pins instead of all three. The p...

SF-COM-12703

This is an M3 hex nut. For use with M3 screws.

SF-PRT-21232

Based on a new generation ARM Cortex M7, this version of the Qwiic Tsunami Super WAV Trigger extends polyphony to 25 mono or 13 stereo simultaneous...

SF-WIG-20636

This is a hobby gearmotor from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use...

SF-ROB-21245

RCWL-0516 is a technology that uses radar Doppler, microwave induction special module for detecting moving objects. The RCWL-0516 microwave radar s...

SF-SEN-21242

The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordi...

SF-DEV-21252

The SparkFun Qwiic BMA400 Micro Triple Axis Accelerometer Breakout offers a 3-axis acceleration sensor perfect for ultra-low-power applications on ...

SF-SEN-21207

The SparkFun Qwiic BMA400 Triple Axis Accelerometer Breakout offers a 3-axis acceleration sensor perfect for ultra-low-power applications on an eas...

SF-SEN-21208

The SparkFun Qwiic LPS28DFW Absolute Digital Barometer offers a unique barometer breakout featuring the LPS28DFW from STMicroelectronics©. The LPS2...

SF-SEN-21221