SparkFun Australia

The SparkFun Qwiic ISM330DHCX Six Degrees of Freedom IMU is a standard-sized, 1in. by 1in. breakout featuring STMicroelectronics' ISM330DHCX; a hig...

SF-SEN-19764

The ESP32-WROOM-DA, which is a module that achieves high-quality, wireless connectivity across large areas, using two complementary PCB antennas in...

SF-WRL-19899

The SparkFun LED Project Kit is a great way to get started with programming and hardware interaction with the Arduino programming language. Each Sp...

SF-KIT-19934

MIKROE Weather Click carries BME280 integrated environmental unit from Bosch. It’s a sensor that detects humidity, pressure, and temperature, speci...

SF-SEN-18823

MIKROE Weather Click carries BME280 integrated environmental unit from Bosch. It’s a sensor that detects humidity, pressure, and temperature, speci...

SF-SEN-18823

The SparkFun RP2040 mikroBUS™ Starter Kit is designed to give you just what you need to start using the Click and Qwiic ecosystems side-by-side pow...

SF-KIT-19936

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-sid...

SF-KIT-19935

We carry several data logging products which have microSD sockets on them: OpenLog Artemis and the Qwiic OpenLog to name but two. They're great for...

SF-DEV-19217

The EM-506N5 GPS receiver from USGlobalSat based on the MediaTek high performance L1 band GNSS receiver. This is the new version from the EM-506. I...

SF-GPS-19629

The AHPI7292S is the world's first WiFi HaLow™ Raspberry Pi™ HAT module from Alfa Network. Similar to LoRa, WiFi HaLow is a new designation from th...

SF-WRL-19956

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you s...

SF-GPS-19576

More and more of our products use U.FL connectors, so we wrote a tutorial on "Three Quick Tips About Using U.FL. However, even when following all t...

SF-TOL-19929

This is a 915MHz SMA Duck Antenna for use with the AHPI7292S WiFi HaLow HAT. We've distinguished it as for use with this HAT as it's an SMA connect...

SF-WRL-20115

The SparkFun Qwiic Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up...

SF-SEN-19662

The next evolution of the Tinkerkit Braccio robot, Arduino Braccio ++ is a robotic arm designed solely for higher education, including engineering ...

SF-ROB-19726

The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions. With the simplicity of integration and sca...

SF-SEN-19727

The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log GPS, serial data, and various pressure, hu...

SF-DEV-19426

The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This boa...

SF-BOB-19626

Charging or powering your USB Type C device can be daunting. Finding a cable that fits both your interface and provides safe power levels is a new ...

SF-CAB-19718

The SparkFun MicroMod Single Pair Ethernet Function Board introduces 10BASE-T1L Two-Wire Ethernet protocol into the SparkFun MicroMod ecosystem. Us...

SF-COM-19038

The SparkFun MicroMod Single Pair Ethernet Kit demonstrates 10BASE-T1L Two-Wire Ethernet protocol within the SparkFun MicroMod ecosystem by using t...

SF-KIT-19628

The PCBite Kit is a great addition to any workstation. Give your arms a rest! This kit comes with a magnetic base plate (210mm x 148mm), and four P...

SF-TOL-19720

HARTING T1 Industrial Single-Pair Ethernet (SPE) Products feature a highly optimized, high-frequency design, shielding, and high mechanical robustn...

SF-CAB-19312

The PCBite Kit is a great addition to any workstation. Give your arms a rest! This kit comes with a magnetic base plate (297mm x 210mm), and four P...

SF-TOL-19721

This passive 1:1 probe is suitable for signal measurements and logic analyzers for high speed serial communication interfaces like SPI, CAN, USB, J...

SF-TOL-19722

A truly hands-free probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complic...

SF-TOL-19723

A truly handsfree 100Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to conne...

SF-TOL-19724

A truly handsfree 200Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to conne...

SF-TOL-19725

The SparkFun Qwiic PIR Starter Kit (1µA) comes with just the basics of what you need to get started working with passive infrared (PIR) sensors. Pa...

SF-KIT-19516

The SparkFun Qwiic PIR Starter Kit (170µA) comes with just the basics of what you need to get started working with passive infrared (PIR) sensors. ...

SF-KIT-19517

With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher t...

SF-KIT-18293

This the IQAudio XLR Interface Board from Raspberry Pi. This board is perfect for those wanting to work with peripheral with a 3-pin XLR connector....

SF-DEV-18371

The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi Pico. The wealth of on...

SF-DEV-19521

The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with all th...

SF-KIT-18441

The MyoWare® 2.0 Muscle Sensor Basic Kit, an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with the bare minim...

SF-KIT-19719

This is a 10 pack of the MyoWare® Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor'...

SF-KIT-19627

The MMC5983MA is a highly sensitive triple axis magnetometer by MEMSIC. It is capable of sensing down to 0.4mG enabling a heading accuracy of ±0.5°...

SF-SPX-19034

The SparkFun MicroMod Alorium Sno M2 Processor features the Snō System on Module (SoM) adapted to the MicroMod M.2 processor form factor. Snō's FPG...

SF-DEV-18030

The SparkFun Surface Transducer Kit gives you everything you need to turn almost any surface into a speaker. A surface transducer is essentially ju...

SF-KIT-19195

The SparkFun Surface Transducer Kit gives you everything you need to turn almost any surface into a speaker. A surface transducer is essentially ju...

SF-KIT-19195

This servo cable has a shrouded male servo connector on one end, and 3x breadboard hookup pigtails at the other end. This makes it easy to connect ...

SF-ROB-19224

This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male serv...

SF-ROB-19223

If you need maximum distance for your LoRa project you need this incredibly durable, outdoor antenna with 5.8dBi gain. This 863-870MHz antenna is 9...

SF-WRL-19274

The SparkFun Qwiic dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical ...

SF-SEN-19036

The SparkFun Qwiic Mini dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vert...

SF-SEN-19218

The SparkFun Qwiic dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical ...

SF-SEN-19037

The SparkFun Qwiic Mini dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vert...

SF-SEN-19451