SparkFun Australia

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic ...

SF-COM-11372

This is Atmel’s high performance, low power 8-bit AVR ATMega328 microcontroller in a pint-sized TQFP package. Yes, you really can solder that. Not...

SF-COM-13448

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that...

SF-DEV-13343

This is the Big Red Box! These beefy, bright red, flanged, plastic enclosures will give your widget the protection (and attention) it deserves. You...

SF-PRT-11366

No, this kit won’t help you scan for Larsons. The Larson Scanner kit is actually named after Glen A. Larson, the man responsible for producing both...

SF-KIT-11365

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load...

SF-SEN-13332

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of...

SF-COM-13326

The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and installed into our Big Red...

SF-DEV-13317

Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 3.0 is a voice recognition shield for Arduino boards integrating an E...

SF-COM-13316

The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital te...

SF-SEN-13314

The Teensy is an amazing development platform that allows you to get more computing power than an Arduino Uno, and in less space. The Teensy 3.1 XB...

SF-BOB-13311

The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due...

SF-BOB-13303

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiri...

SF-DEV-11286

Even though the Tron movies have been out for a while, electroluminescence is still the coolest thing since sliced bread. The only downer is carryi...

SF-COM-11222

This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to us...

SF-WRL-11215

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes ...

SF-SEN-11207

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes read...

SF-SEN-13266

The SparkFun SparkPunk Kit is a sound generator made in the spirit of the Atari Punk Console. Rather than simply recreating the Atari Punk, the Spa...

SF-KIT-11177

The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to read multiple types of ...

SF-SEN-13261

These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and...

SF-ROB-13258

These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean look. These LED holders ...

SF-COM-11148

This little round on/off toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick ...

SF-COM-11138

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-r...

SF-WRL-13231

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow. Features: 3.0-3.4VDC Forwar...

SF-COM-11121

Huge 10mm through-hole LEDs. Mood-light an entire wall! Features: 2.1-2.3VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 10,000...

SF-COM-11119

These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-o...

SF-PRT-13227

The SparkFun XBee Explorer Serial is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including ...

SF-WRL-13225

This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit incl...

SF-KIT-13198

This is the SparkFun XBee Wireless Kit, the perfect box full of goodies to get you started using XBees. Inside this kit you will find two XBee Mod...

SF-KIT-13197

This is the Parallel Gripper Kit A, a simple and durable robotics kit that is great for “getting a grip” on pretty much any robotics project! Desig...

SF-ROB-13178

This is the Standard Gripper Kit B, a simple and durable robotics kit that is great for “getting a grip” on pretty much any robotics project! Desig...

SF-ROB-13175

The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silic...

SF-SEN-11028

VS1063 is an easy-to-use, versatile encoder, decoder and codec for a multitude of audio formats. They can be hard to get hold of but we’ve got them...

SF-COM-11025

This non-invasive current sensor (also known as a “split core current transformer”) can be clamped around the supply line of an electrical load to ...

SF-SEN-11005

The NCP1402 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries) and output...

SF-PRT-10967