SparkFun Australia

The IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero...

SF-DEV-17740

In this kit, you'll build an open source communication device - a "conversation machine." Once your kit is complete, you'll be able to make pattern...

SF-CUST-18089

The SparkFun QwiicBus MidPoint works in tandem with the QwiicBus Endpoint so you can extend the range of your I2C bus and easily tap into it to dro...

SF-COM-18000

The SparkFun QwiicBus Kit comes with everything you need to get started with the SparkFun QwiicBus system in one handy package. The kit includes tw...

SF-KIT-17250

The Soft Power Switch is a passive, hard on/off switch with software feedback and control. In other words, it's like the on/off switch on a laptop....

SF-SPX-17870

You may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to 400cm. The SparkF...

SF-SEN-17777

Is your project linked to environmental protection, awareness or study, or to protecting human life? Perhaps you are developing a wildlife tracker,...

SF-SPX-17236

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a ...

SF-SEN-17372

The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor netwo...

SF-WRL-17830

Designed for transmit and receive at 401MHz, this quarter-wave antenna is the perfect partner for our ARGOS ARTIC R2 satellite communication breako...

SF-WRL-17523

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 1µA SparkFun EKMB1107112 PIR Breakout is a si...

SF-SEN-17373

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K Qwiic PIR uses an ...

SF-SEN-17374

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 1µA SparkFun EKMB1107112 Qwiic PIR uses an EKM...

SF-SEN-17375

This product is designed to connect the RTK Surveyor product line to the popular Serial Telemetry Radios. But if you're like me, it's great to have...

SF-CAB-17239

This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included ...

SF-CAB-17240

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to e...

SF-DEV-17723

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to e...

SF-DEV-17724

The Loomia Double Backlit User Interface is like the Single Backlit Button, but twice the fun! Use this part if you need to control something up an...

SF-COM-17865

This is a 300mm long Male TNC to Male SMA cable. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO...

SF-CAB-17833

Based on the MAX17048, the Qwiic Fuel Gauge is perfect for monitoring your single-cell LiPo. While the MAX17048 provides pack voltage, it really sh...

SF-SPX-17715

This is a simple 300mm long Male RP-TNC to Male SMA cable. Each cable is capable of a nominal impedance of 50Ω with a cutoff frequency of 39GHz. Th...

SF-CAB-17496

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured ...

SF-CAB-17831

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by pro...

SF-BOB-16446

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by pro...

SF-BOB-16445

The SparkFun SGP40 Air Quality Sensor provides a measurement of the quality of the air in your room or house. The SGP40 is based on Sensirion's CMO...

SF-SEN-18345

With the SparkFun Cryptographic Development Kit you will get everything you need to learn the fundamentals of cryptographic authentication and how ...

SF-KIT-18303

The SparkFun OpenLog Artemis Kit is intended to provide everything you need to log the data of your choice with the OpenLog Artemis and the Qwiic E...

SF-KIT-18295

The SparkFun MicroMod Teensy Processor leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector...

SF-DEV-16402

The SCD41 from Sensirion is a high quality Photoacoustic based CO₂ sensor capable of detecting 0 to 40000ppm with high accuracy over 400-5000ppm ±(...

SF-SPX-18366

A U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable. Less than -2 dB cable insertion loss up to 6 GHz. Both connectors a...

SF-WRL-18154

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provi...

SF-SEN-18367

The Arducam 5MP Plus OV5642 Mini provides an easy to use camera solution for those working with low-cost microcontrollers such as those used with A...

SF-DEV-18440

The Pico4ML TinyML Dev Kit from Arducam is a single board system powered by Raspberry Pi's RP2040 microcontroller. It has the power to run all Tens...

SF-DEV-18439

Based on a new generation ARM Cortex M7, the Qwiic Tsunami Super WAV Trigger extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44...

SF-WIG-18159

The Inline DC Panel Meter Kit has all the bits you need to create an elegant, seamless DC volt/ameter. Measuring current usually means interrupting...

SF-SPX-18571

The ESP32-C3 WROOM Development Board is an entry-level development board based on ESP32-C3-WROOM-02, a general-purpose module with 4MB SPI flash. T...

SF-WRL-18035

The SparkFun JetBot AI Kit is a robot platform powered by the Jetson Nano Developer Kit V3 by NVIDIA. This SparkFun kit is based on the open-source...

SF-KIT-18486

The SparkFun JetBot AI Kit v3.0 is a robot platform that can be powered by your own Jetson Nano Developer Kit by NVIDIA. This SparkFun kit is based...

SF-KIT-18487

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your aver...

SF-TOL-18342

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your aver...

SF-TOL-18341

Start a proximity sensing project today with the SparkFun Proximity Sensing Kit. Using an infrared proximity sensor, a RedBoard Qwiic, and the incl...

SF-KIT-18448

Designed exclusively with SparkFun's À la Carte custom board designer, the Toaster Oven Reflow Control Board is just that – a single, fully populat...

SF-WIG-18007

The PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. Weighing in at just 22 grams, ...

SF-ROB-18591

The RFM97C is a great little module that incorporates the SX1276 LoRa transceiver from Semtech. LoRa is best for long range communication (hundreds...

SF-SPX-18574

It's best to think of the ESP32-S2 WROOM Module as the next step in the ESP32 WROOM module line. It builds on the benefits of the original ESP32 WR...

SF-WRL-18583

The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino programming language. This l...

SF-KIT-18577

This IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required o...

SF-PRT-18582

Need to keep track of the airflow in your data center or around your servers? How about making sure your HVAC and air control systems are functioni...

SF-SEN-18377