SparkFun Australia

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header...

SF-PRT-12796

This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in leng...

SF-CAB-15464

The SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. Th...

SF-KIT-15267

This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for oth...

SF-PRT-14427

These headers are made to work with the SparkFun ESP32 Thing and ESP32 Power Control Shield boards. Each set of headers makes your ESP32 Thing easi...

SF-PRT-14311

This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button...

SF-COM-09341

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it ...

SF-BOB-09056

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a b...

SF-DEV-14057

This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port o...

SF-TOL-08639

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew in...

SF-DEV-14014

At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has eve...

SF-DEV-13975

RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. Th...

SF-BOB-00716

This is a very small, extremely light weight battery based on Lithium Ion chemistry. This is the highest energy density currently in production. Ea...

SF-PRT-13853

Through-hole RJ11 socket with PCB mounting posts. 6-pin connection - housing accepts common telephone connectors/wiring.If you need a board for thi...

SF-PRT-00132

The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog ca...

SF-DEV-13712

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects...

SF-DEV-10867

Have you ever seen a Weevil? It’s a pretty under-appreciated beetle, so we thought it deserved a kit. Okay, so we just kind of like the name and t...

SF-KIT-10723

The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, ...

SF-TOL-12942

The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and d...

SF-SEN-10167

Small, powerful, BT connected and with all the sensors you may need to design innovative applications.The Arduino Nano 33 BLE Sense is an evolution...

SF-DEV-17048

Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! ...

SF-DEV-15795

The J-Link line of JTAG programmers from Segger is well known for their top of the line debuggers. The J-Link EDU Mini is a great option for those ...

SF-PGM-15345

Rotary encoders can be used similarly to potentiometers. The difference being that an encoder has full rotation without limits (It just goes round ...

SF-COM-15141

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be u...

SF-ROB-14451

The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pi...

SF-DEV-14495

This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced...

SF-TOL-09161

This is a joystick very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers -...

SF-COM-09032

The SparkFun Simultaneous RFID Reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Frequency Identifi...

SF-SEN-14066

This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2....

SF-WRL-11812

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to stan...

SF-BOB-11722

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control...

SF-COM-00102

We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly....

SF-COM-00097

These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors u...

SF-ROB-13259

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. W...

SF-CAB-13243

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide sol...

SF-PRT-10811

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on on...

SF-CAB-12970

You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we’re always up to date...

SF-TOL-10603

You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we’re always up to date...

SF-TOL-10602

This is the Mini SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our mini modular breadboards with the same connections to pi...

SF-PRT-12702

The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical ...

SF-SEN-12650

There are more and more hobbyists taking advantage of surface mount technology these days. With affordable tools like hot air and hotplate reflow o...

SF-PRT-12621

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this...

SF-DEV-09718

Is your I2C bus not ACK'ing the way you expect? Do you need to discover a UART's mysterious baud rate? Or do you want to reverse engineer an SPI pr...

SF-TOL-18627

The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network...

SF-WRL-17146

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi,...

SF-PRT-16763

The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous weather kits we...

SF-KIT-16274

The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an...

SF-SEN-15242