SparkFun Australia

The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully func...

SF-DEV-15837

The MS8607 from TE is an impressive combination pressure, humidity, temperature (PHT) sensor with accuracy of ±2mbar pressure, ±3% humidity, and ±1...

SF-SPX-16298

This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a sm...

SF-PRT-16233

This no-clean flux applicator pen is for PCB rework and repair. Resin and halide-free no clean flux has excellent wetting abilities and leaves no p...

SF-TOL-16257

The Trace Tech Flux Remover Pen is for use with electronic assembly, electronic repair and soldering/desoldering. It provides convenient touch up c...

SF-TOL-16258

This is the Micro Metal Gearmotor to LEGO® Axle Adapter (pack of 4). This little dingus connects our popular micro gearmotors to a standard LEGO® a...

SF-COM-16259

The Infinite Noise TRNG is an affordable and secure true random number generator (TRNG). It’s based on a modular entropy multiplier technique that ...

SF-WRL-16264

This is a big one from Mean Well, a 451.2W single output switching power supply. This power supply is extremely reliable and beefy, able to output ...

SF-TOL-16265

This is a 150W single output switching power supply from Mean Well. This power supply is extremely reliable and able to output 12VDC at 12.5A. We'v...

SF-TOL-16266

The AMT-17C cable has a JAE FI-W17S connector for hookup. With a 17 pin connector type and 28AWG this cable comes in at 36" giving you plenty of ro...

SF-TOL-16261

This is a fixed metal power inductor with an inductance of 1uH, a maximum DC current of 1.45A and a maximum DC resistance of 106mOhms.TAIYO YUDEN M...

SF-COM-16283

This is a shielded fixed inductor with an inductance of 2.2uH, maximum DC current of 1.2A and a maximum DC resistance of 110mOhm.Murata LQM Series ...

SF-COM-16284

This is a fixed inductor with an inductance of 2nH, maximum DC current of 220mA and a maximum DC resistance of 300mOhm.Murata LQP03TQ RF Inductors ...

SF-COM-16285

This is a fixed inductor with a inductance of 2.7nH, maximum DC current of 900mA and a maximum DC resistance of 70mOhm.TDK MHQ1005P Multilayer Cera...

SF-COM-16286

This is a fixed inductor with an inductance of 2.2uH, maximum DC current of 1.7A and a maximum DC resistance of 140mOhm.Murata DFE Series Metal All...

SF-COM-16287

This is an inductor ferrite bead with an impedance of 120Ohms, maximum DC current of 300mA and a maximum DC resistance of 700mOhms.Murata BLM Serie...

SF-COM-16288

This is a fixed inductor with an inductance of 1.5uH, a maximum DC current of 9.1A and a maximum DC resistance of 15.8mOhm.Coilcraft XFL4020 Ultra-...

SF-COM-16289

This is a fixed inductor with an inductance of 33nH, a maximum DC current of 300mA and a maximum DC resistance of 650mOhms.

SF-COM-16290

This is a fixed inductor with an inductance of 3.3uH, a maximum DC current of 0.45A and a maximum DC resistance of 442mOhms.TDK MLZ Inductors for D...

SF-COM-16291

This is a Ferrite chip bead with an impedance of 470Ohm and a maximum DC current of 1A.Murata BLM Series EMIFIL® Chip Ferrite Beads are for power s...

SF-COM-16292

SMARTSAM D21 is a series of low-power microcontrollers using the 32-bit ARM Cortex M0+ processor, and ranging from 32- to 64-pins with up to 256KB ...

SF-DEV-15943

Microchip Technology ATmega328 8-bit AVR® Microcontrollers (MCUs) are high-performance RISC-based devices that combine 32KB ISP Flash memory with r...

SF-COM-16051

We've taken the classic, portable, rechargeable lithium ion battery pack and tweaked the design to make it amenable to low current applications. Wh...

SF-TOL-15204

The SparkFun RED-V (pronounced “red-five”) RedBoard is a low-cost, development board featuring the Freedom E310 SoC which brings with it the RISC-V...

SF-DEV-15594

The SparkFun RED-V (pronounced “red-five”) Thing Plus is a low-cost, development board in our popular Thing Plus footprint and adds in the Freedom ...

SF-DEV-15799

This is a high-quality color CMOS camera module. Power the CM-32 module, hook up any display, monitor, or LCD screen with an RCA input and get vivi...

SF-SEN-15906

This is the SparkFun LED Starter Kit, an ultimate assortment of LEDs packed into a single red box! Now, this isn't a box filled with only one type ...

SF-KIT-15418

You're probably already familiar with Silicon Labs' brilliant 47xx line of radio devices. We've been carrying their FM tuners for a long time and f...

SF-SPX-15853

The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters...

SF-SEN-14588

This is a Screw Terminal with 3.5mm pitch pins. Comes in 2, 3, or 4 positions and have the really cool feature of slide-locking together to form an...

SF-PRT-15519

This is a breakout board for the glass ferrule type fuse that fits great with our 5mm fuse clips. Fuses are pretty simple, if current exceeds the r...

SF-BOB-15697

The SparkFun Fuse Breakout Kit comes with everything you need to assembly & use a glass capsule, inline fuse (ferrule type) for your project. T...

SF-KIT-15702

The M1621HCT-P-SMA is a high performance Iridium Certified passive antenna designed for wireless applications.The antenna is built on proprietary M...

SF-SPX-15789

With a clear view of the sky, the Qwiic Iridium 9603 allows you to send and receive short messages. It works anywhere in the world, far beyond the ...

SF-SPX-15780

The SparkX ATECC608A Cryptographic Co-processor Breakout allows you to add strong security to your IoT node, edge device, or embedded system. This ...

SF-SPX-15838

If you need maximum distance for your LoRa project you need this incredibly durable, outdoor antenna with 5.8dBi gain. This 860-930MHz antenna is 9...

SF-WRL-15597