SparkFun Australia

It’s your basic blue action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6...

SF-COM-11994

This is a breakout board for InvenSense’s ITG-3200, a groundbreaking triple-axis, digital output MEMS gyroscope. The ITG-3200 features three 16-bit...

SF-SEN-11977

The SparkFun Inventor’s Kit LabPack includes 10 complete Inventor’s Kits and 2 SIK refill packs. The kit has everything you need including RedBoard...

SF-LAB-13972

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. Th...

SF-KIT-13969

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching swi...

SF-COM-11974

PCB mount clip to hold a AA battery. Sold in single units, you’ll need two. These work great for small, low power applications that need a battery ...

SF-PRT-07949

The name of this part pretty much says it all! This is the Proto Pedal Enclosure, a custom-machined aluminum case designed specifically for the Spa...

SF-PRT-13967

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching swi...

SF-COM-11971

Hot-air rework nozzles compatible with all of our rework stations. Sold in single units by model number. Documents: Spec Sheet

SF-TOL-07925

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary sw...

SF-COM-11970

Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks...

SF-DEV-07914

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary sw...

SF-COM-11969

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary sw...

SF-COM-11968

These are very small surface mount quartz crystals used where size is a concern. Ideal for use with Phillips LPC ARM ICs. Note: Quite a few of the...

SF-COM-07846

This is an class 10 16GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi. This SD card and adapter is pe...

SF-COM-13945

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary sw...

SF-COM-11967

This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this one LED for three status...

SF-COM-07844

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath tha...

SF-COM-07836

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maxi...

SF-ROB-11965

This is a breakout board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage level...

SF-BOB-11955

This is a basic 16 character by 2 line display with a Blue background and a Yellow backlight. Utilizes the extremely common HD44780 parallel interf...

SF-LCD-00790

This is a 0.45kg (1lb) reel of 2.85mm “natural-colored” Alloy 910 nylon co-polymer filament for 3D printing. Specially developed to exhibit the ide...

SF-TOL-13938

This is a 0.45kg (1lb) reel of 3mm “clear” Bridge nylon co-polymer filament for 3D printing. Taulman’s “Bridge” high-strength nylon co-polymer brid...

SF-TOL-13937

Small breakout board for the PIC Microchip ENC28J60. Contains all the necessary hardware to implement an Ethernet interface including the isolation...

SF-BOB-00765

Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a...

SF-COM-11951

This is a 1kg (2.2lb) reel of 3mm black INOVA-1800 co-polyester filament for 3D printing made from Eastman Amphora™ 1800 3D polymer. INOVA-1800 pri...

SF-TOL-13936

The USB Bit Whacker is a spectacular little development board featuring the PIC18F2553. Based on the work of Brian Schmalz, the UBW is a small boar...

SF-DEV-00762

The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The ST...

SF-KIT-13930

The Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and ...

SF-TOL-13929

This is the CR2025 20mm coin cell battery. You may be wondering what sets this guy apart from the more common CR2032 coin cell battery, the answer ...

SF-PRT-11928

This is a breakout for the BC127 Bluetooth Module. The BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Aud...

SF-WRL-11927

This is the PurpleTooth Jamboree a full-function board, designed to provide audio bridge support through the A2DP, HFP, and AVRCP Bluetooth Classic...

SF-WRL-11924

These green ELastoLite inverter connectors are to be used in conjunction with the INV133 electroluminescent inverter for driving ELastoLite panels....

SF-COM-11913

This 0.012" Muscle Wire® (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific am...

SF-COM-11900

The SparkFun Inventor’s Kit for Google’s Science Journal App is an interactive selection of tools to inspire future scientists and makers. Inside e...

SF-KIT-13923

This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+. This transceiver IC operates in the 2.4GHz band and has ma...

SF-WRL-00691

The Spectacle Director Board controls all the actions in a Spectacle project. Though the Director Board doesn’t do too much on its own, it is what ...

SF-DEV-13912

These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers. This is...

SF-PRT-11894

Nordic Semiconductor nRF24L01+. Transceiver chip operating in the 2.4GHz band. Take all the coolness of the nRF2401A and add some extra pipelines, ...

SF-COM-00690

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide...

SF-DEV-11893

This is a fantastic find for SFE. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Specifications: GSM/850E : 824 t...

SF-CEL-00675

The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interact...

SF-WIG-11888

This is the epitome of the phrase “appearances can be deceiving,” and trust us, with the Hitec HS-85MG that couldn’t be more true. The HS-85MG is a...

SF-ROB-11887

Surface mount DPDT switch for those tight portable designs. Capable of switching up to 1.2VA (360mA at 3.3V and 240mA at 5V). Documents: Datash...

SF-COM-00597

This unique motor is the Hitec HS-646WP servo. What separates this servo from the rest is that it is waterproof with a IP67 (Ingress Protection-67)...

SF-ROB-11886

PCB edge mount Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connector. The thickness betw...

SF-WRL-00592