SparkFun Australia

The SparkFun LTE CAT M1/NB-IoT Shield with Hologram SIM Card equips your Arduino or Arduino-compatible microcontroller with access to data networks...

SF-CEL-15087

The eAP87606A Stereo Camera from eYs3D is a high-end imager controller and patterned IR illuminator with a global shutter capable of both color and...

SF-SEN-14725

You may be familiar with ePaper or eInk displays from eReaders like the Kindle. This display is the next step up with three colors instead of the c...

SF-SPX-15048

The Sunflower shield from Cowfish Studios enables your Arduino to run extremely responsive graphics and touch processing while still leaving plenty...

SF-SPX-15091

The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters...

SF-SEN-14786

The SparkFun Triad Spectroscopy Sensor is a powerful optical inspection sensor. Three AS7265x spectral sensors are combined alongside a visible, UV...

SF-SEN-15050

The bladeRF 2.0 micro xA4 is the next generation Software Defined Radio (SDR) that has been packed into a small form factor and was designed for hi...

SF-WRL-15043

This is a simple, transparent enclosure designed to protect your bladeRF 2.0 micro from external threats. The enclosure is made of a high density, ...

SF-PRT-15044

LoRa stands for "Long-Range" referring to a modulation technique whose specialty is low power transmission of small data packets – perfect for Inte...

SF-SPX-15034

No longer do you need to worry about what supplies to purchase to prepare for your next electric paint project. The Touch Board Pro Kit from Bare C...

SF-KIT-15055

This is a four-pack of omni-directional antennas and cables that have been assembled to be specifically used with the LimeSDR. Each of these antenn...

SF-WRL-15028

This is a two-pack of omni-directional antennas that have been assembled to be specifically used with the LimeSDR Mini. Each of these antennas cove...

SF-WRL-15030

This is a small flexible, grayscale OLED display. That’s right, we said flexible. We’ve been hearing about flexible displays for years, it’s finall...

SF-SPX-14543

Affectionately dubbed “Fairy Lights” for their similar appearance, these LED string lights are a great way to light up any project with no solderin...

SF-PRT-14507

Affectionately dubbed “Fairy Lights” for their similar appearance, these LED string lights are a great way to light up any project with no solderin...

SF-PRT-14506

The HiFive1 is a low-cost, Arduino-compatible development board featuring the Freedom E310 making it the best way to start prototyping and developi...

SF-DEV-15026

Affectionately dubbed “Fairy Lights” for their similar appearance, these LED string lights are a great way to light up any project with no solderin...

SF-PRT-14503

Affectionately dubbed “Fairy Lights” for their similar appearance, these LED string lights are a great way to light up any project with no solderin...

SF-PRT-14502

Affectionately dubbed “Fairy Lights” for their similar appearance, these LED string lights are a great way to light up any project with no solderin...

SF-PRT-14500

  The Scanse Sweep 3D Scanner Kit is an advanced 60-piece DIY kit that gives you everything you need to assemble a 3D scanner using your Scanse Sw...

SF-KIT-14482

The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. With the Motion Shield’s onboard LSM9DS1 IM...

SF-DEV-14430

Helium adapters make it simple to physically connect the Atom Prototyping Module to popular embedded devices. The Helium Atom to Raspberry Pi Adapt...

SF-WRL-14552

Helium adapters make it simple to physically connect the Atom Prototyping Module to popular embedded devices. The Helium Arduino/mbed Adapter is an...

SF-WRL-14551

The Helium Atom Prototyping Module is a low-power, dual-band wireless module perfect for developers. The pin layout is compatible with many existin...

SF-WRL-14549

This is a 1kg (2.2lb) reel of 2.85mm black PLA (polylactic acid) plastic filament for 3D printing. PLA is a bioplastic and makes for a great genera...

SF-TOL-14584

The Magnetic Imaging Tile uses an array of 64 hall effect sensors to convert magnetic fields to the visual spectrum. That’s right! You can now see ...

SF-SPX-14652

The Qwiic RTC from SparkFun is a very unique and exciting Real Time Clock. It is extremely precise (within 3 minutes over a year!), extremely low p...

SF-SPX-14642

The Qwiic system makes it easy to read all sorts of sensors, but what if you want to log that data? Qwiic OpenLog is an easy to use I2C based data ...

SF-SPX-14641

The OpenMV M7 Camera is a small, low-power microcontroller board that allows you to easily implement applications using machine vision in the real ...

SF-SEN-14632

Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they’re often unreliable or ...

SF-SEN-14585

Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they’re often unreliable or ...

SF-SEN-14518

The Helium Ethernet Starter Kit for Raspberry Pi includes everything needed to easily give your embedded devices secure, long-range connectivity. T...

SF-KIT-14548

The Helium Ethernet Starter Kit for Arduino includes everything needed to easily give your embedded devices secure, long-range connectivity. This k...

SF-KIT-14547

The SparkFun Variable Load Kit is a quick-to-assemble board designed to allow users to draw a specific amount of current from a voltage input....

SF-KIT-14449

Are you looking to add a lot of color to your project? These massive 32x32 RGB LED panels are an awesome place to start. You can create animations,...

SF-COM-14646

This Neon Flex Rope is a 2m long (~6.5 feet), LED strip that simulates the neon effects you see in storefronts at night. Each rope is packed with s...

SF-COM-14555