SparkFun Australia

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different ch...

SF-COM-13705

1/6 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters ...

SF-COM-11507

The ATMEGA8U2-AU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a sin...

SF-COM-13703

This fun and educational introduction to the exciting field of robotics (the science of designing, building, and operating robots) gives kids the b...

SF-BOK-11499

Make your Arduino the onboard brain of a mobile robot and learn robotics, electronics, and programming with this versatile kit and its accompanying...

SF-ROB-11494

The MyoWare LED Shield is designed to pair with the MyoWare Muscle Sensor. The blue 10-segment bar graph shows the magnitude of the measured signal...

SF-DEV-13688

This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon cable to the low-level p...

SF-PRT-11490

This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals and get hacking! This ...

SF-CAB-11489

The Solder : Time II is the latest version of Spikenzie Labs' Solder:Time watch kit. This new version is even more hackable than ever. The onboard ...

SF-KIT-11488

The Edimax WiFi Adapter is a nano-sized USB wireless adapter that supports maximum range and speed when connected to your local network. Despite th...

SF-WRL-13677

This board is a unique board recommended by a SparkFun customer. When playing with SD, you sometimes need to view what the SPI traffic is doing, wh...

SF-TOL-11468

These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also...

SF-PRT-11464

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colo...

SF-COM-11453

The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative humidity, and temperature...

SF-DEV-13674

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colo...

SF-COM-11452

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colo...

SF-COM-11451

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colo...

SF-COM-11449

We’ve been using and selling Analog Devices' ADXL accelerometers for a good while now, and now we’ve found another great part in the series! The AD...

SF-SEN-11446

Stepper motors are great motors for position control. They can be found in desktop printers, plotters, 3d printers, CNC milling machines, and anyth...

SF-ROB-13656

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-RTL-11427

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-RTL-11426

This is a 3-terminal microswitch two pack, each equipped with a small push-button. These switches have a great ‘clicky’ sound to it with a nice tac...

SF-COM-13639

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-RTL-11422

The LilyPad Simblee BLE Board is a wearable development board that allows you to add mobile application functionality via Bluetooth Low Energy (BLE...

SF-DEV-13633

The SparkFun Simblee BLE Breakout board is a programmable board that allows you to add mobile app functionality via Bluetooth Low Energy (BLE, or B...

SF-WRL-13632

The SparkFun Photon Weather Shield is an easy to use add-on board that grants you access to barometric pressure, relative humidity, and temperature...

SF-DEV-13630

For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm 4-digit 7-...

SF-COM-11408

The Qduino Mini is a tiny, Arduino-compatible board with a battery connector and charger built-in as well as a fuel gauge that can tell you when to...

SF-DEV-13614

This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB. This little connector...

SF-PRT-13612

Function generators are useful in a ton of applications from RF to embedded logic. They’re not usually super cheap though. Good news: we found a ki...

SF-KIT-11394

We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed ...

SF-RTL-11379

This is a very simple RJ45 PoEthernet MagJack connector that can help connect you to the Internet with the ability to provide power. Power over Eth...

SF-PRT-13606

The µLCD-144-G2(GFX) is a compact and cost effective display module using the latest state of the art LCD (TFT) technology with an embedded GOLDELO...

SF-LCD-11377

You can’t have any development board without some sort of prototyping area, the SparkFun Photon ProtoShield takes care of this. This ProtoShield ma...

SF-DEV-13598

These shaft-mountable aluminum timing pulleys use XL timing belts and attach to a 0.25" output shaft with a set screw. They have 15 teeth with a ge...

SF-ROB-13597

There are times when you need to subject your electronics to some pretty intense environments. The most challenging part of designing for rough con...

SF-PRT-11370

The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted...

SF-SEN-13339

These sew-on fabric snaps are the same size used on the LilyPad SimpleSnap boards. You can sew these into your project to allow for easy removal or...

SF-DEV-11347

You talked, we listened, and we’ve revised our Geiger Counter board to address some of the most pressing concerns. This version features an improve...

SF-SEN-11345

The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. It’s easy to...

SF-DEV-13321

This adhesive, omni-directional antenna is perfect for situations when you’re trying to get a signal out from a transmitter that you’ve jammed down...

SF-WRL-11320

The SparkFun Inventor’s Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFun Inventor’s Kit for P...

SF-KIT-13320

This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing app...

SF-SEN-11319

Description: How could anyone improve on the clear plastic breadboard. I mean, that’s pretty sweet right? What if it was red? This translucent ...

SF-PRT-11317