SparkFun Australia

Atlas Scientific is on a mission to make high-quality sensors for environmental monitoring available to everyday hackers and makers. All of their k...

SF-SEN-12908

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio ...

SF-PRT-10588

Scratch is a fun, free, beginner-friendly programming environment where you connect blocks of code to build programs. While most famously used to i...

SF-BOK-12902

Open Softwear* is a book about fashion and technology. More precisely it is a book about Arduino boards, conductive fabric, resistive thread, soft ...

SF-BOK-10576

The Ubertooth One is an open source 2.4 GHz wireless development platform suitable for Bluetooth experimentation. Based on the powerful LPC175x ARM...

SF-WRL-10573

This is a 34' roll of thermal printing paper for use with our thermal printer. This roll is smaller than you find at most office supply stores so i...

SF-COM-10560

No, these aren’t some sort of weird, AA battery, this is actually a 18650 Lithium Ion Cell. These round high capacity cells have been mainly used i...

SF-PRT-12895

NB: This product has US pins on it, and it not certified or suitable for use in Australia.This is a high quality switching ‘wall wart’ AC to DC 5V ...

SF-TOL-12890

These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. When using a current limiti...

SF-ROB-10551

BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock wa...

SF-PRT-10550

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SM...

SF-TOL-12878

These wireless receivers work with our 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a v...

SF-WRL-10533

This is the Vernier Photogate, a new take on the traditional photogate. By emitting a beam of infrared light from one upright to the other, the Pho...

SF-SEN-12876

This is the Vernier Motion Detector, a simple sensor that can be used to collect position, velocity and acceleration data of moving objects. This V...

SF-SEN-12875

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to ...

SF-DEV-10524

This is the Vernier Dual-Range Force Sensor, a great general purpose apparatus that can be used to measure the push and pull of different objects a...

SF-SEN-12873

This is the Vernier pH Sensor, a simple device that can be used to measure the acidity and basicity of liquids. This Vernier sensor can be used in ...

SF-SEN-12872

This is the Stainless Steel Temperature Probe, a tough little Vernier Sensor that can be used to measure the temperature of organic liquids and eve...

SF-SEN-12871

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the nece...

SF-BOB-10496

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on th...

SF-ROB-12859

This is the SparkFun Vernier Interface Shield, a simple add-on to give your Arduino the capability to interface with Vernier sensors. Attached to t...

SF-DEV-12858

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SF-PRT-10463

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off t...

SF-PRT-10462

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off...

SF-PRT-10461

The Arduino Uno is the undisputed champion of all development boards, why would you not want to keep your board safe and sound inside this black op...

SF-PRT-12839

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the tran...

SF-WRL-12823

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up blue! So now you can get ...

SF-COM-10443

This is a simple LED-illuminated tactile button with a red cap. It’s just like a basic tactile button, but it lights up red! So now you can get vis...

SF-COM-10442

The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connectivity into your proj...

SF-WRL-12820

This is a simple LED-illuminated tactile button with an orange cap. It’s just like a basic tactile button, but it lights up orange! So now you can ...

SF-COM-10441

This is the BC127, a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. Each module comes preloaded with B...

SF-WRL-12819

This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between ea...

SF-PRT-12807

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get...

SF-COM-10439

This is the Mindwave Mobile from NeuroSky, an EEG headset that safely measures and transfers the power spectrum (alpha waves, beta waves, etc) data...

SF-SEN-12805

This is a thermal printer like you would find on a cash register or adding machine. It will print simple strings passed to it via TTL serial, bitma...

SF-COM-10438

Every super spy has a small compact camera at their disposal just to get the advantage on the bad guy and though you may not be a “00” this high re...

SF-SEN-12804

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. ...

SF-RTL-10423

Dustyn Roberts' Making Things Move is a wonderful introduction to practical mechanics. This book teaches you the basics of building moving mechanis...

SF-BOK-10394

This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflec...

SF-SEN-12785

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends....

SF-PRT-10372

The SparkFun EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to eight strands of elec...

SF-COM-12781

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends...

SF-PRT-10369

This is the Exofabulatronixx 5200 MOSS Ultimate Kit, an incredibly fun kinematic robot construction system from Modular Robotics. Exofabulatronixx ...

SF-KIT-12778

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends....

SF-PRT-10366

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the tran...

SF-WRL-12775

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends...

SF-PRT-10364