SparkFun Australia

These 3" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12339

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each bo...

SF-DEV-09350

These 6" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12338

These 6" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mat...

SF-ROB-12337

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12336

These 10" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

SF-ROB-12335

This is not your normal PIR! The Qwiic Human Presence Sensor - AK9750 is a passive infrared sensor with four discrete sensors built into one digita...

SF-SPX-14289

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts a...

SF-ROB-09347

These blue precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal f...

SF-ROB-12334

Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thic...

SF-ROB-12333

These zinc-plated socket head machine screws are 5/8” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

SF-ROB-12332

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your...

SF-ROB-12330

We took the Micro OLED and encapsulated it to make it water-resistant. Why? So your fish can watch TV. The Qwiic Water-Resistant OLED is a small m...

SF-SPX-14287

These skate wheel adaptors have a diameter of 1”, a width of 0.32”, and utilize the 0.77” hub pattern. These adaptors allow you to attach the 2.975...

SF-ROB-12329

The Qwiic Shield for Arduino connects the I2C bus (GND, 3.3V, SDA, and SCL) on any Arduino compatible board to the SparkFun Qwiic system. We’ve inc...

SF-SPX-14286

These aluminum beams are great for making unique links and connections in your Actobotics project thanks to 5 through-holes running its length and ...

SF-ROB-12327

These 6" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12326

These 6" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tu...

SF-ROB-12324

These 1.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, whe...

SF-ROB-12323

This Thermal Gap Filler provides 1.1W/mK of thermal conductivity that can conform to most surfaces. It’s perfect for high-value products that you n...

SF-TOL-14283

These 2" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12320

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12319

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12318

The tinyTILE, an Intel® Curie-based board, is a miniaturized adaptation Arduino/Genuino 101® board perfect for wearable and IoT applications. The t...

SF-DEV-14281

This is the Ameba Board from Realtek, an IoT solution inside the familiar Arduino form factor. The Ameba Board supports WiFi, GPIO, NFC, I2C, UART,...

SF-WRL-14280

This is a tiny trackball akin to those found on a number of Blackberry models (8100, 8300, 8320, 8800, 8830, etc). Each of the four spindles have a...

SF-COM-09308

These 4" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12315

These 4" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating...

SF-ROB-12314

These zinc-plated socket head machine screws are 1-1/8"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/...

SF-ROB-12313

This is an 80W 3-in-1 (3 output ranges) Switching DC Power Supply. Gives a regulated 0-36VDC @ 2.2A, 80W max output. Takes a 100-240VAC, 50/60Hz in...

SF-TOL-09291

These servo shaft attachments are great when connected to your 3F Futaba servo spline and used in conjunction with a ServoBlock Kit. These aluminum...

SF-ROB-12312

These 4" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12311

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12310

The STEMTera is an innovation in breadboard history. It is the first breadboard with an Arduino-compatible hardware suite built in that works with ...

SF-DEV-14278

These 1" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12309