SparkFun Australia

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends....

SF-PRT-10362

The RFM12BSP is a great inexpensive option for wireless communication; it’s an ISM band FSK transceiver module implemented with a unique PLL. These...

SF-WRL-12770

At our current size, it’s inevitable that there will be some waste in production. This is a grab bag of some of the parts that have fallen off the ...

SF-DD-10351

This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface which ...

SF-SEN-10345

If you’re looking for a chassis base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with a hall...

SF-ROB-10336

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of max...

SF-ROB-10333

Running out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use i...

SF-DEV-12761

Create distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and XBee radios. By the time yo...

SF-BOK-10324

These digital (LH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them fo...

SF-PRT-12754

A really cool rechargeable Lithium Ion coin cell battery. The battery is rated for 3.6V @ 110mAh - a great way to run a small embedded project for ...

SF-PRT-10319

This is a common SMD barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1m...

SF-PRT-12748

These alligator clips are useful for smaller wires that you don’t want to deform. The clip has smooth flat metal blades that clamp down on the wire...

SF-PRT-10290

These acrylic mounts are used to attach a miniature microswitches to a slotted surface like an Actobotics channel, making the switch perfect for sl...

SF-COM-12747

These acrylic mounts are used to attach a miniature microswitches to a slotted surface like an Actobotics channel, making the switch perfect for sl...

SF-COM-12746

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positiv...

SF-PRT-10287

These acrylic mounts are used to attach a miniature microswitches to a slotted surface like an Actobotics channel, making the switch perfect for sl...

SF-COM-12745

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is bu...

SF-BOB-12731

This is the LilyPad revision of our FTDI Basic. It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the thickness....

SF-DEV-10275

With more than 60 practical and creative hacks, this book helps you turn Raspberry Pi into the centerpiece of some cool electronics projects. Want ...

SF-BOK-12730

Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltag...

SF-SEN-12728

This display module from 4D systems is the uLCD-70DT, a 7.0” intelligent touchscreen LCD powered by the DIABLO16 graphics processor. The uLCD-70DT ...

SF-LCD-12725

PCB mount clip to hold a AAA battery. Sold in single units, you’ll need two for each battery. These work great for small, low power applications th...

SF-PRT-12718

This black fiber optic fabric is a cool and unique way to add some shine to your e-textiles project. There are optical fibers actually woven into t...

SF-COM-12712

This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well ...

SF-BOB-12708

These are clear, self-adhesive silicone bumpers 8mm in diameter and about 2mm tall. These bumpers raise your PCB or project up off your desk which ...

SF-PRT-10230

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic ...

SF-COM-12704

This is the LM3914 Dot/Bar display analog-controlled LED driver that uses an alinear output scale. With this driver all it takes is a single, analo...

SF-COM-12694

Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST ty...

SF-PRT-10210

Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to produc...

SF-SEN-12670

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10200

This is the 24 LED NeoPixel Ring from Adafruit, a small chainable 2.6" (66mm) outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s ...

SF-COM-12665

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10199

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10198

This is the 16 LED NeoPixel Ring from Adafruit, a small chainable 1.75" (44.5mm) outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS281...

SF-COM-12664

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10197

This is the NeoPixel NeoMatrix from Adafruit a large board with 64 WS2812 RGB LEDs arranged in an 8x8 matrix. Each LED is capable of drawing as muc...

SF-COM-12662

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10196

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10195

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10194

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10193

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10192

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a t...

SF-COM-10191

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver ...

SF-ROB-10189

The new generation 18 pin PICAXE microcontroller now has parallel tasking, touch sensors and more memory/RAM. See the Info Sheet for a comparison...

SF-COM-10187

The SparkFun Inventor’s Kit for RedBot is a great way to get started with two motor robotics and sensor integration using the Arduino programming l...

SF-ROB-12649

Here we have some conductive ribbon. Essentially, it’s a fabric with 3 conductors woven into the ribbon. It measures roughly 0.2" wide and 0.03" th...

SF-DEV-10172