SparkFun Australia

The BOT120 PICAXE 20x2 Microbot is a simple to assemble kit that uses a unique design which requires no soldering of wires to build and/or reconfig...

SF-DEV-10170

This thru-hole soldering kit is very similar to our Simon Says; First, it’s a great way to learn how to solder; second, it’s a fun game to play; an...

SF-KIT-12634

Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an inte...

SF-BOB-10160

This is a simple 8" long 2.5mm audio cable. It is terminated with a 2.5mm audio plug on one side and unterminated with bare wires on the other end....

SF-CAB-10159

This classroom pack from Bare Conductive provides you with everything you need to teach and engage up to 30 participants of any age the basics of c...

SF-KIT-12628

This powerhouse is the Hitec HS-755HB servo. Able to take in 6 volts and deliver an impressive 183 oz-in. of maximum torque at 0.23 sec/60°, this i...

SF-ROB-12625

This new revision includes a JST cable and also fixes the TX/RX swap from the last revision. Now you can use an FTDI correctly. We are also includi...

SF-KIT-10140

This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing app...

SF-SEN-10128

This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing app...

SF-SEN-10127

This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 MEMS gyro. With this board, you get a full 6 degrees of freedom. The senso...

SF-SEN-10121

These aluminum channels are the building blocks to the Actobotics line and function as the back bone to your electromechanical project. These chann...

SF-ROB-12616

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad. Funnel is a toolkit to sketch y...

SF-DEV-10116

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards....

SF-PRT-10114

This HDMI to VGA Adapter enables you to connect an HDMI port to a VGA port. These adapters are especially useful for displays or monitors that only...

SF-CAB-12613

Calling this the “Serial Enabled LCD Kit” doesn’t do justice to how cool it actually is. After you’ve assembled this all-PTH kit, you’ll be left wi...

SF-LCD-10097

These continuous rotation 3.8:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous...

SF-ROB-12606

The MintyBoost kit from Adafruit Industries includes all the electronic parts necessary to build your own MintyBoost: a small & simple (but ver...

SF-KIT-10094

These continuous rotation 2:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous A...

SF-ROB-12604

Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, ...

SF-COM-10080

These 360° rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobot...

SF-ROB-12603

This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in both directions. It is highly conductive with...

SF-DEV-10070

These 360° rotation 3.8:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actob...

SF-ROB-12601

This is a conductive knit fabric for use in e-textiles. It is similar in feel to a nylon ripstop material. It is highly conductive with a surface r...

SF-DEV-10056

This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in one direction. It is highly conductive with a...

SF-DEV-10055

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red and yellow LEDs (10 of each) all ...

SF-COM-10049

These 360° rotation 2:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobot...

SF-ROB-12599

These standard rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Act...

SF-ROB-12597

This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our...

SF-PRT-10030

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of 25 LEDs all conveniently packaged in a nice...

SF-COM-10023

These standard rotation 3.8:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous A...

SF-ROB-12596

These standard rotation 3:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Act...

SF-ROB-12595

We all know that you can never get too many LEDs, especially RGB LEDs! Don’t worry, we’ve got you covered. This is a pack of 100. Buy in bulk - sav...

SF-COM-10017

These standard rotation 2:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Act...

SF-ROB-12594

These angle brackets are perfect for attaching two Actobotics aluminum channels together at a 90° angle. Each side of these brackets offer two 6-32...

SF-ROB-12593

This PVC clamp mount has a 1.315" bore, providing an easy way to incorporate standard 1" PVC pipe into your next project. Two set screws secure to ...

SF-ROB-12592

The universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold in pairs. The set incl...

SF-ROB-10006

The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring acceleration forces on...

SF-SEN-12589

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft with a ...

SF-COM-09998

We all know that you can never get too many LEDs, especially RGB LEDs! Don’t worry, we’ve got you covered. This is a pack of 100. Buy in bulk - sav...

SF-COM-09985

This is the new PICkit 3 from Microchip. If you want an official programmer from Microchip, this is it! The PICkit 3 allows debugging and programmi...

SF-PGM-09973

This is a simple breakout for the Roving Networks Bluetooth module. All pertinent pins are broken out and labeled. This new version’s headers are u...

SF-WRL-12579