Sunfounder Australia

Features 1. The easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. 2. The power pin provides the 500...

SU-USB

IntroductionThis Raspi UPS HAT is a micro UPS power source. It supports a maximum input of 5V/2A and output of 5V/2A. With the Raspberry GPIO reser...

SU-UPSHAT

Introduction This is a great and simple kit for you to learn about Arduino. Detailed materials such as module description, principle explanation an...

SU-UNIVERSALV2

Introduction This Ultimate Starter Kit is designed for the Raspberry Pi hobbyists, equipped with the basic components to use the Raspberry Pi, incl...

SU-ULTIMATEKITPITFH

Introduction This starter kit is designed for the beginners among the Arduino hobbyists, equipped with some basic components and the Arduino board ...

SU-ULTIMATEKITMARS

Introdction The Sunfounder level converter is a device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This lev...

SU-TS0584

Introdction This USB to TTL serial adapter module can work with different types of computer systems and drivers. The power LED, TXD LED and RXD LED...

SU-TS0486

Introduction  Phototransistor, or photo triode, is a photoelectric conversion component that senses the light intensity. The stronger light, the la...

SU-TS0471

Introduction Based on the Hall Effect, a Hall sensor is a one that varies its output voltage in response to a magnetic field. Hall sensors can be c...

SU-TS0224

For more info, please refer to http://wiki.sunfounder.cc/index.php?title=AD_Converter-ADC0832_Module Product Description Operating Frequency: 250K...

SU-TS0222

Application  Mainly to decorate More details can be found in www.sunfounder.com/wiki/index.php?title=7-Color_Auto-flash_LED_Module Component List ...

SU-TS0220

Working voltage: 3 - 5V SIZE - PCB Size: 2.0 x 2.0 cm For more info, please refer to http://wiki.sunfounder.cc/index.php?title=Buzzer_modules Int...

SU-TS0211

Introduction 1.An analog temperature sensor module that consists of an NTC thermistor, resistor, capacitor in a circuit. 2.The NTC thermistor is ve...

SU-TS0202

Introduction When a low level is given to SIG, the PNP transistor is energized; then the coil of the relay thus is energized and the normally open ...

SU-TS0201

Technical Details 1. Maximum sample rate (VDD = 5V): 200 ksps 2. Low power CMOS technology 3. Industrial temperature range: -40°C ~ +85°C Applicat...

SU-TS0200

IntroductionThe PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output...

SU-TS0199

Introduction This is a 5V 8-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can b...

SU-TS0012

Package Including1 x 7" Touch screen display1 x Adapter Board1 x Display Ribbon Cable4 x jumper wires4 x stand-off and screwsSetup guide

SU-TOUCHSCREENLCD

Technical DetailsThis is a standard 7 inch full color display with high resolution and lower power consumption. It can be applied as a Raspberry Pi...

SU-TFTLCDV2.0

Features: Working perfect with Raspberry Pi 3, 2 and RPi 1 Model B B+ High-Resolution Picture Full Color Display Low Power Consumption More ...

SU-TFTLCD

Product description Introduction This is a magical tool kit with various components inside for learning, which will lead you to the world of Ard...

SU-SUPERV2

Introduction The Analog Smoke/LPG/CO Gas Sensor (MQ - 2) module utilizes an MQ-2 as the sensitive component and has a protection resistor and a pot...

SU-TS0204

Introduction 1. Adopt the universal 32.768kHz crystal oscillator. 2. With a button cell holder for LIR2032 rechargeable Li-ion battery. 3. Use thre...

SU-TS0203

Application It is applicable to light intensity detection, related detection sensors, smart car light-seeking module, etc. Component List - 1 x Ph...

SU-TS0197

Introduction The RGB LED module is constituted of a plug-in full-color LED. The intensity of the three primary colors, namely, red, green, and blue...

SU-TS0196

Introduction A reed switch is a type of line switch component that realizes control by magnetic signals. It induces by a magnet. The “switch” here ...

SU-TS0195

Introduction The module can count by rotation the pulses output both clockwise and counterclockwise. Different from potentiometer, the counting is ...

SU-TS0194

Application The module can be applied as a switch for input/output control. Component List - 1 * Switch module

SU-TS0183

Component List - 1 * 4x4 keypad module (wire not included) For more information,refer to WIKI.

SU-TS0180

Specification FLUX: 2.2% Material: Metal Weight: 100g Melting point : 217-227°C    Type: Welding/cutting tools Working temperature : 285-385°C Func...

SU-TINWIRE

How to use  1. Push Set-knob for loading until the knob stops  2. Melt the solder with an iron where it is intend to remove  3. Please aim the nozz...

SU-TINSUCKER

Specification Weight: 80g Color: Black Application: Cutting Specifications: 125 mm Model Number: TGK-A01 DIY Supplies: Electrical Material: Chrome ...

SU-TGK-A01CUTTINGPLIERS

Technical Details Introduction This T-shape extension board, as the name suggests, is to extend the GPIOs of a Raspberry Pi. Underneath the power a...

SU-T-SHAPEEXTENSIONBOARDW

Specifications Material: Cast Iron  Base Size: 11.5X10X2cm  Sinking Spring Type Funnel Length: 10cm  Product Name : Soldering Gun Iron Holder Color...

SU-SUPPORTSTATION

Introduction It is made by the pure copper as well as the special chemical formula to ensure efficiency and quality, which can also be used to abso...

SU-SOLDERREMOVERWIRE

Specification Product Name: Solder Iron Holder  Material: Metal, sponge  Model: 936 Package include 1 x soldering iron holder

SU-SOLDERIRONHOLDER

NOTE: THIS SOLDERING IRON IS HAS A US PLUG AND IS NOT COMPATIBLE WITH AUSTRALIAN POWER OUTLETS.Specification:Power: 60W Net weight: 108gColor: Blue...

SU-SOLDERINGGUN

Description:  The solder material is composed of tin, lead and a variety of chemical activator synthesis. It will produce toxic ingredients when we...

SU-SMOKEABSORBER

Introduction It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an SunFounder Meg...

SU-SHIELDRAMPS1.4

Technical Details 1.This SD Card module can make your SD application more easier and simple. 2.It is easily interfaced as a peripheral to your ardu...

SU-SDCARDMODULESLOTSOCKET

Specification Model Number: Heat dedicated Material: Polyimide Application: Masking Feature: Heat Resistant Adhesive Type: Hot Melt Adhesive Side: ...

SU-RESISTANTTAPE

Introduction When a low level is given to SIG, the PNP transistor is energized; then the coil of the relay thus is energized and the normally open ...

SU-RELAYMODULELOWLEVEL

Introduction RFID module The original Philips MFRC522 chip design circuit card reader is easy to use and low cost, and applies to the user equipmen...

SU-RC522CARDREAD

Specification Length: 10M Thickness: 0.13mm Type: Adhesive Tape DIY Supplies: Tiling Model: BY-973UL Color: Dark brown Temperature Range : 260℃ Siz...

SU-PTFETAPE

SpecificationColor: AmberElongation: 50%Thickness: 0.06mmSupplies: Metalworking Long - term temperature: 260Instantaneous temperature: 350Size: 3mm...

SU-POLYIMIDETAPE

Technical Details: Introduction  Raspberry Pi PN532 NFC module, as its name implies, is based on PN532 chip and used to 13.56 MHz near field commun...

SU-PN532NFCMODULEFORRASPB

Introduction This is a board that's very similar to other Pololu-based electronics implementations, including RAMPS,but it can support up to 5 step...

SU-PCB1.5.7CONTROLBOARD

Introduction This is a power supply module designed for MB102 breadboards. It is powered by a 5V DC jack with an input voltage of 6.5v-12V. The mod...

SU-TS0473