Teensy

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It su...

AF-4384

Who else could pack a 600 MHz microcontroller into such a Teensy little board? The Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with ...

AF-4323

LED matrices are getting more powerful with each passing year requiring you to need a more powerful board to control them. That’s where this shield...

SF-DEV-15046

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 2.0 breaks out all of the IO av...

SF-DEV-12765

The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. This shield features...

SF-DEV-13995

The Prop Shield with Motion Sensors for Teensy 3.2 and Teensy-LC is meant for making interactive light and sound effects on small handheld props an...

AF-3085

The Teensy 2.0 is a complete USB-based microcontoller development system, in a very small footprint! All programming is done via the USB port. No s...

AF-199

The Teensy is an amazing development platform that allows you to get more computing power than an Arduino Uno, and in less space. The Teensy 3.1 XB...

SF-BOB-13311

This is the Teensy Audio board add-on for the Teensy 3.x line development boards. This audio board provides you with an easy-to-use tool to add hig...

SF-DEV-12767

3.0 has been replaced with 3.1 - which is even better and awesomer! We've got a few of these remaining, in case you want to pick them up at a disco...

AF-1044

Teensy 3.1 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.1 brings a low-cost 32 bit ARM Cortex-M...

AF-1625

So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or...

AF-1902

This low-cost (LC) Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield featu...

SF-DEV-13996

This low-cost Prop Shield for Teensy 3.2 and Teensy-LC is meant for making light and sound effects on small handheld props and wearable costumes! G...

AF-3086

Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and even ...

AF-3200

The Teensy++ is a complete USB-based microcontoller development system, in a very small footprint! All programming is done via the USB port. No spe...

AF-731

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a ...

SF-DEV-16996

Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the...

SF-DEV-16997

The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This ...

SF-DEV-17119

The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boar...

SF-DEV-17156

This PSRAM chip can add 8 Megabytes of RAM for use on Teensy 4.1One PSRAM Chip for 8 MB MemoryThe PSRAM chip is meant to be soldered to the smaller...

PR-COM0218

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be...

SF-PRT-17152

The SmartLED Shield enables the Teensy 4 to drive high-quality graphics to HUB75 RGB LED panels, with 36-bit color and 240 Hz refresh rate across l...

SF-DEV-17521

So you have a fresh and fancy Teensy 4 and an RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss a...

AF-4828