SparkFun

This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don’t wor...

SF-COM-12792

Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast where you need it to br...

SF-COM-10095

A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.Features:  Pin Style: Square ...

SF-PRT-00116

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. Features: ...

SF-PRT-00553

In this world nothing can be said to be certain, except we need headers, headers, and more headers!Each pack contains ten blue 36-pin 0.1" pitch br...

AF-4150

This is a simple breakout board for Analog Device’s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can op...

SF-BOB-09719

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing du...

SF-BOB-08276

This is a 0.45kg (1lb) reel of 3mm “clear” Bridge nylon co-polymer filament for 3D printing. Taulman’s “Bridge” high-strength nylon co-polymer brid...

SF-TOL-13937

These digital (LH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them fo...

SF-PRT-12754

This is an industrial grade DC Buck-Boost converter that inputs 8V to 40V and outputs 12V up to 3A or 36W. With tons of heatsinking and protection,...

SF-COM-18376

There are LEDs and then there are Build Upons LEDs. Each Build Upons PTH LED in this 10 pack are brick shaped in the same form of your favorite con...

SF-COM-13312

This is the first hands-on guide to the entire process of designing and manufacturing open source hardware. Drawing on extensive personal experienc...

SF-BOK-13220

Create distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and XBee radios. By the time yo...

SF-BOK-10324

The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, ...

SF-TOL-12942

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1...

SF-CAB-09556

This is a replacement soldering tip for the Weller Portasol Butane Soldering Iron Kit. The double-flat type tip is 1mm wide. Replacing the tip is a...

SF-TOL-14227

These LR44 button cell batteries are fairly common but it can be hard to keep them around. They fit our digital calipers, so if you use yours as mu...

SF-PRT-11305

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the bac...

SF-COM-09277

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath tha...

SF-COM-07836

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the bac...

SF-COM-08033

This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath t...

SF-COM-07835

This kit was designed to accompany Rob Faludi’s Building Wireless Sensor Networks book, which is the comprehensive guide to ZigBee wireless networ...

SF-KIT-10413

This is a 5 wire cable with a SHR style (1mm pitch) connector on each end. These are very similar to our Qwiic connectors and cables but are 5-pin....

SF-CAB-14990

This is a 5 wire cable with a SHR style (1mm pitch) connector on each end. These are very similar to our Qwiic connectors and cables but are 5-pin....

SF-CAB-14991

This is a 5 wire cable with a SHR style (1mm pitch) connector on each end. These are very similar to our Qwiic connectors and cables but are 5-pin....

SF-CAB-14989

This is a 5 wire cable with a SHR style (1mm pitch) connector on one end and 5 breadboard friendly pins on the other. These are very similar to our...

SF-CAB-14992

This is a four wire cable with a 5 pin, 1.25mm pitch connector on one end. These cables are helpful if you’re trying to simply get breadboard acces...

SF-CAB-15132

No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for ef...

SF-ROB-13207

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll ...

SF-DEV-13262

This kit includes everything you need to make your very own capacitance meter, able to measure caps anywhere between the range of 500uF to 1pF. Man...

SF-KIT-09485

Fingerprint scanners have been easily available at a consumer level for a number of years now, so it is only logical that they would continue to gr...

SF-SEN-17151

Fingerprint scanners have been easily available at a consumer level for a number of years now, so it is only logical that they would continue to gr...

SF-SEN-15338

This is 10 pack of tiny 4.7µF SMD decoupling capacitors. Each of these capacitors offers a DC voltage rating of 16V and a capacitance tolerance of ...

SF-COM-15169

This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect...

SF-COM-08375

This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.1" spaced leads make this a perfect candidate for breadboarding an...

SF-COM-08571

This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations a...

SF-SEN-09403

Sometimes all you need is a simple but durable carrying case for your parts or projects. This carrying case is molded out of protective, black High...

SF-PRT-14474

This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LAN...

SF-CAB-08915

These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter lip allows them to fit snuggly...

SF-ROB-12365

Resonators function like crystals, but are a lower cost solution that does not require external caps. These resonators are +/-0.5% or better from ...

SF-COM-09420