jaycar

Use this module to drive an 8x8 dot matrix display. Driven by shift registers it requires only three inputs, plus power. Multiple modules c...

TB-XC4532

A 64 Red LED matrix, this module is easily controlled with the Led Control library. Display your own custom characters, or use multiple mod...

TB-XC4499

A full colour RGB display driver designed to drive a tri-colour 8x8 dot matrix. Driven by an ATMega328p (The same chip as the Arduino), this modu...

TB-XC4498

These compact LCD displays are identical to those found in some old Nokia phones, and feature the PCD8544 chipset. An easy way to a small b...

TB-XC4616

Micro servo motor, perfect for use with XC4618 Pan and Tilt bracket. Small enough to connect directly to an Arduino Board for experimenting.-500 d...

TB-YM2758

Use this module to generate sound from your Arduino; libraries are available to produce different tones and frequencies. •    Acti...

TB-XC4424

Using a MQ series gas sensor, this module easily adds alcohol detection to your project. An analogue output can be used to monitor changes ...

TB-XC4540

Do you want to communicate wirelessly with your DuinoTECH project, but don’t want the hassle of configuring RF modules? Well this module with Blue...

TB-XC4382

As Bluetooth® standards improve, and with iOS reducing support for the SPP protocol, thisXC-4382 Bluetooth Module brings the latest Bluetoo...

TB-XC4382

Receiving power from a USB socket or DC socket, this module adds a compact power supply to your breadboard. Features: * Plugs strai...

TB-XC4606

Mid-sized prototyping breadboard with 400 tie points. * 300 tie points in centre section * 100 tie points on power rails ...

TB-PB8820

With labeled rows and columns and adhesive back for mounting, it is ideal for electronic prototyping and Arduino projects. Features: ...

TB-PB8815

Extremely easy to set up. Use this data logging shield to store your data to files on any FAT16 or FAT32 formatted SD card, or have it to b...

TB-XC4536

This module accepts any voltage from 4.5-35VDC, and outputs any lower voltage from 3-34V. Output is adjusted via a multi-turn potentiometer...

TB-XC4514

The Arduino compatible boost module can be used to provide higher voltages for your project, such as running 5V Arduino projects from Lithi...

TB-XC4609

The popular HC-SR04 ultrasonic distance module provides an easy way for your DuinoTECH to measure distances up to 4.5m. Use it to add obsta...

TB-XC4442

Looking to get into Arduino® but don't know where to start? We have specially selected the components in this kit to allow an easy entry in...

TB-XC3900

A compact ATMega 32U4 based main board designed with portability in mind. Just like the Leonardo, a single chip handles main controller fun...

TB-XC4620

Using the powerful ESP8266 IC, the ESP-13 Wifi Shield adds much more than just plain wifi to your Arduino. It has an 80MHz processor and ca...

TB-XC4614

Sense magnetic presence, rotating wheels and magnets, door sensors and any other magnets near this device. •    Output turns on at...

TB-XC4434

Receive data sent via infrared, this module can read the signals sent by most IR remote controls. Pair it with the TX Module (XC-4426) to m...

TB-XC4427

Use this device to send data over infrared. Use your Arduino to control your TV or Media Centre. Combine it with our RX module (XC-4427) an...

TB-XC4426

This module is an inexpensive solution for an obstacle avoidance sensor, perfect for robotic projects and very easy to interface directly w...

TB-XC4524