pololu

Overview This chassis kit consists of the structural pieces from the Balboa 32U4 Robot Kit plus the Stability Conversion add-on, giving you almost...

PL-3573

Battery Balancer & Watt Meter displaying readings in watt meter mode. When you connect this watt meter between a power source and its lo...

PL-2176

This 120:1 gearmotor (gearbox with motor) is a great low-cost alternative to modified hobby servos or Tamiya gearboxes, and a higher-speed alterna...

PL-985

This 60:1 gearmotor (gearbox with motor) is a great low-cost alternative to modified hobby servos or Tamiya gearboxes, and a higher-speed alternat...

PL-984

This gripper is driven by an included BCM servo, which accepts standard 1 – 2 ms hobby RC servo pulses. The pincers can open to a little over 180...

PL-987

We carry a wide variety of servos, from ultra-high-torque monster servos with up to 1600 oz-in of torque, to sub-micro servos weighing less t...

PL-986

Specifications Diameter: 2.36" (60 mm) Width of tire: 0.87" (22 mm) Hub protrusion length: 0.28" (7 mm) Weight: 0.92 oz (26 g) Note: if ...

PL-988

Overview BD65496MUV Single Brushed DC Motor Driver Carrier, bottom view with dimensions. The BD65496MUV from ROHM is a tiny H-bridge motor d...

PL-2960

Overview This product is a power switch implemented as a pair of P-channel MOSFETs configured as a high-side switch with reverse voltage prote...

PL-2815

Overview This product is a power switch implemented as a pair of P-channel MOSFETs configured as a high-side switch with reverse voltage prote...

PL-2814

Overview The Pololu Pushbutton Power Switch is a compact, solid-state power switch that features built-in reverse-voltage protection and is co...

PL-2813

Overview The Pololu Pushbutton Power Switch is a compact, solid-state power switch that features built-in reverse-voltage protection and is co...

PL-2812

These brilliant blue LEDs are a great way to accent any robotics or electronics project. These are brand-new LEDs with water-clear lenses and a 1...

PL-341

Overview The BlueSMiRF Silver is a Bluetooth wireless serial link from SparkFun Electronics. This version of the popular BlueSMiRF use...

PL-2725

Note: This product has been replaced by the BlueSMiRF Silver – Bluetooth Modem. This product has firmware version 4.77. The replacement ...

PL-2194

Discontinuation Notice: This product has been replaced by the LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator. Overview This...

PL-1646

Discontinuation Notice: This product has been discontinued. Please consider our 5V boost regulator NCP1402 or adjustable boost regulator 2.5-9.5V...

PL-795

Discontinuation Notice: This product has been discontinued. Please consider our 5V boost regulator NCP1402 or adjustable boost regulator 2.5-9.5V...

PL-784

Discontinuation Notice: This product has been discontinued. Please consider our adjustable boost regulator 2.5-9.5V as an alternative. If you’re ...

PL-796

Discontinuation Notice: This item has been discontinued. Please consider our adjustable boost regulator 2.5-9.5V as an alternative. If you’re loo...

PL-797

Discontinuation Notice: This product has been discontinued. Please consider our 5V boost regulator NCP1402 as an alternative. If you’re looking f...

PL-782

Discontinuation Notice: This product has been discontinued. Please consider our 5V boost regulator NCP1402 and 2-AA battery holder as alternative...

PL-781

Discontinuation Notice: This product has been discontinued. Please consider our 5V boost regulator NCP1402 and 2-AAA battery holder as alternativ...

PL-783

Overview These lightweight brackets are made from 0.8mm-thick aluminum and are specifically designed to work with Sharp’s analog GP2Y0A02, GP2Y0A2...

PL-2679

Overview These lightweight brackets are made from 0.8mm-thick aluminum and are specifically designed to work with Sharp’s analog GP2Y0A02, GP2Y0A2...

PL-2678

Overview These lightweight brackets are made from 0.8mm-thick aluminum and are specifically designed to work with Sharp’s analog GP2Y0A02, GP2Y0A2...

PL-2677

Overview MicroSD memory cards (originally known as TransFlash) provide a compact and inexpensive way to add gigabytes of non-volatile storage to...

PL-2597

Overview This carrier board makes it easy to interface a microSD memory card (originally known as TransFlash) with an SPI-capable microcontrol...

PL-2587

This is a breakout board for a 6-pin male JST SH-type connector that provides access to each pin on a row of 0.1″-pitch through holes, making it co...

PL-4773

This is a breakout board for a 6-pin male JST SH-type connector that provides access to each pin on a row of 0.1″-pitch through holes, making it co...

PL-4772

This is a breakout board for a 6-pin male JST SH-type connector that provides access to each pin on a row of 0.1″-pitch through holes, making it co...

PL-4771

This is a breakout board for a 6-pin male JST SH-type connector that provides access to each pin on a row of 0.1″-pitch through holes, making it co...

PL-4770

This brushed DC motor is great for applications where you want a lot of power in a small package. We generally recommend running it between 1.5 V...

PL-1592

This is the 130-size DC motor used in the larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree). It...

PL-1117

Overview Protect your Balboa robot from falls with this bumper cage kit, which includes: four bumper skids four bumper cage cross bars ...

PL-3574

Note: these capacitors are polarized; applying reverse power will destroy them (sometimes in spectacular and dangerous ways). The negative lead i...

PL-882

Overview This Carbon Monoxide (CO) and flammable gas sensor detects the concentrations of CO and combustible gas in the air and ouputs its re...

PL-1483

This injection molded case is a great way to protect a RoboClaw while its integrated fan will help keep the RoboClaw cool, allowing it to deliver h...

PL-3595

These 0.1 μF 100 V ceramic capacitors have many uses, including noise suppression on motors. The leads are formed with 0.2" spacing for easy brea...

PL-1166

Discontinuation notice: This product has been replaced by 0.1 μF capacitors with a better (X7R) dielectric. These 0.1 μF 50 V ceramic capacitors h...

PL-1165

These 0.1 μF 50 V ceramic capacitors have many uses, including noise suppression on motors. The leads are formed with 0.1″ spacing for easy bread...

PL-2451

This board is a charge pump voltage inverter that converts an input voltage between 1.8 V and 5.3 V to a corresponding negative output voltage, wit...

PL-2839

Note: The power adapter included with this kit has changed from the 6W supply in the product picture to a 5W supply (not pictured), and while it c...

PL-1254

Discontinuation Notice: This module has been replaced by the much more capable CHR-UM6-LT orientation sensor. For an alternative IMU, please cons...

PL-1263

Note: This module has been replaced by the pin-compatible CHR-UM6-LT orientation sensor. Please note that while the UM6-LT is physically a drop-i...

PL-1253

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2310