Sparkfun

The SM5100B is a miniature, quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module, which can be integrated into a great number of wireless projects. ...

SF-CEL-09533

Do you need that extra push over the cliff? The Large sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a...

SF-COM-11950

Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a...

SF-COM-11951

Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic le...

SF-COM-00315

The Hackerspace Passport was a concept that sprung up as a way for hackers to show off their membership and credentials when visiting other hackers...

SF-SWG-11079

This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed...

SF-WRL-13001

The Hakko FX-901 is a cordless soldering iron that is both portable and practical and provides you with a means to easily solder on the go. Powered...

SF-TOL-13151

NOTE: THIS SOLDERING IRON IS HAS A US PLUG AND IS NOT COMPATIBLE WITH AUSTRALIAN POWER OUTLETS.For over 50 years, Hakko has been producing superior...

SF-TOL-11704

The US1881 is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin...

SF-COM-09312

The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output...

SF-SEN-14709

This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Ham...

SF-COM-14023

If you are looking to use your HAMlab as more than a software defined radio (SDR), this kit is where you are going to want to start! This Diagnosti...

SF-WRL-15002

This HDMI to VGA Adapter enables you to connect an HDMI port to a VGA port. These adapters are especially useful for displays or monitors that only...

SF-CAB-12613

These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 10-pin male headers. This i...

SF-PRT-11896

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side ...

SF-PRT-11542

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller...

SF-PRT-12791

This is a simple 2x3 female PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between ...

SF-PRT-13010

This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between ea...

SF-PRT-12807

This is a super small, 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27m...

SF-PRT-15363

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm ...

SF-PRT-15362

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm ...

SF-PRT-15362

This is a SMD 4-pin right angle male header. We use this header on our Graphic LCD Serial Backpack. Pins have 0.1" spacing between rows and betwe...

SF-PRT-12638

These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers. This is...

SF-PRT-11894

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side ...

SF-PRT-11544

This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now, but never the...

SF-PRT-12590

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side ...

SF-PRT-11540

This is a SMD 6 pin right angle male header. We use this header on our LilyPad Main Board. Pins have 0.1" spacing between rows and between pins. ...

SF-PRT-09015

These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 8-pin male headers. This is...

SF-PRT-11895

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side ...

SF-PRT-11543

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side ...

SF-PRT-11541

Be still my beating heart! With the heART Surface Mount Soldering Kit you will be able to learn the basics of SMD soldering by being able to assemb...

SF-KIT-14640

3D Printing and Laser Cutting are awesome processes for making fast prototypes of complex parts but attaching those parts together can prove diffic...

SF-SPX-14581

We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed ...

SF-PRT-09353

We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed ...

SF-RTL-11379

The SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. It’s great for heat-shrink, melting things, and even very basic...

SF-TOL-10326

These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the ...

SF-COM-11288

These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the ...

SF-COM-11289

This is a 5g syringe of white heatsink compound (aka thermal grease, thermal paste, thermal goo). Use this whenever you’re connecting a component t...

SF-PRT-09599

Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.

SF-PRT-00121

These heavy duty wheels have a diameter of 4” and a width of 1”. They have a hard inner plastic core and a smooth outer rubber tire. These wheels u...

SF-ROB-12124

These heavy duty wheels have a diameter of 6” and a width of 1”. They have a hard inner plastic core and a smooth outer rubber tire. These wheels u...

SF-ROB-12437

Helium adapters make it simple to physically connect the Atom Prototyping Module to popular embedded devices. The Helium Arduino/mbed Adapter is an...

SF-WRL-14551

The Helium Atom Prototyping Module is a low-power, dual-band wireless module perfect for developers. The pin layout is compatible with many existin...

SF-WRL-14549

Helium adapters make it simple to physically connect the Atom Prototyping Module to popular embedded devices. The Helium Atom to Raspberry Pi Adapt...

SF-WRL-14552

The Helium Ethernet Starter Kit for Arduino includes everything needed to easily give your embedded devices secure, long-range connectivity. This k...

SF-KIT-14547