sparkfun

These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and...

SF-ROB-13258

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and ...

SF-ROB-13302

It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping g...

SF-TOL-09200

If you use your hobby knife a lot, chances are you will need extra blades. These #11 blades are very sharp and good for trimming all sorts of thing...

SF-TOL-10325

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things l...

SF-ROB-11696

This is the Hobby Motor and Encoder Kit from DAGU, an inexpensive and reliable set of add-ons for your next robotic project. Inside this kit are th...

SF-ROB-13260

The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed ...

SF-ROB-16413

The Hologram eUICC SIM Card is a mix between legacy and new technology for cellular service for your project. Hologram’s eUICC SIMs enable profile ...

SF-CEL-17117

Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for p...

SF-PRT-08867

Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.

SF-PRT-08865

Standard 22 AWG stranded white wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for p...

SF-PRT-08866

An assortment of colored wires: you know it’s a beautiful thing. Six different colors of solid core wire in a cardboard dispenser box. Sit this on ...

SF-PRT-11367

An assortment of colored wires: you know it’s a beautiful thing. Six different colors of stranded wire in a cardboard dispenser box. Sit this on yo...

SF-PRT-11375

Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08022

Standard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08027

Standard 22 AWG solid Gray hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08025

Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08023

Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08026

Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SF-PRT-08024

Hot-air rework nozzles compatible with all of our rework stations. Sold in single units by model number. Documents: Spec Sheet

SF-TOL-07925

Here’s a replacement heating element for our hot-air rework stations. It’s compatible with Sunkko stations and our own branded rework station. The ...

SF-TOL-11130

This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air flows. This unit display...

SF-TOL-10706

This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air flows. This unit display...

SF-TOL-14557

Quad hub mounts attach to the inside of a channel at a 90 degree angle providing you with additional attachment points for the open top of a channe...

SF-ROB-12349

These set screw hubs make it capable to connect a micro gearmotor with a 3mm bore to a precision disk wheel or other object with a 0.77" hub patter...

SF-ROB-12104

This hub adapter lets you connect Actobotics parts with a 0.77" hub pattern to parts with a 0.625" hub pattern. The holes for the 0.77" pattern are...

SF-ROB-12167

This hub adapter lets you connect Actobotics parts with a 0.77" hub pattern to parts with a 1.5" hub pattern. The holes for the 1.5" pattern altern...

SF-ROB-12199

This hub adapter lets you connect Actobotics parts with a 1.5" hub pattern to parts with a 1.5" hub pattern. The hole alternate between tapped and ...

SF-ROB-12129

These aluminum double servo hub arms can bolt directly to the aluminum hub on servo power gearboxes via four 6-32 x 3/8" machine screws. Each doubl...

SF-ROB-12413

These 45 degree hub mounts mate directly to Actobotics channels in multiple positions and are useful as attachment points for shafts and tubes with...

SF-ROB-12188

These 90 degree hub mounts mate directly to Actobotics channels in multiple positions and are useful as attachment points for shafts and tubes with...

SF-ROB-12102

These quad hub mounts can attach to brackets, ServoBlocks, or anything that needs a 90 degree angle with additional attachment points for Actobotic...

SF-ROB-12353