pololu

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers...

PL-3147

Overview With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers m...

PL-3149

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-1934

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-1935

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-2180

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-2181

Discontinuation notice: This board has been replaced by the newer L3GD20 carrier, which uses a higher resonant frequency that makes it more resist...

PL-1272

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s L3GD20H three-axis digital-output gyroscope; we therefore recommend car...

PL-2129

Click here to get a quote and place your order What we offer: cheap stencils for electronics prototyping Close-up of a mylar solder paste st...

PL-446

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LIS3MDL three-axis digital magnetic sensor; we therefore recommend care...

PL-2737

Note: ST has discontinued the LISY300AL IC, so this product has been discontinued. Please consider our dual-axis gyros as replacements. Overv...

PL-765

Overview As digital devices get smaller and faster, once ubiquitous 5 V logic has given way to ever lower-voltage standards like 3.3 V, 2.5 V, a...

PL-2595

As of March 1st, 2011, the Logomatic now ships with the MCP73831 battery charger IC instead of the hard-to-find MAX1555. Overview The highly p...

PL-1623

Save by getting both the double gearbox and the low-voltage dual serial motor controller in combination! The Tamiya 70168 double gearbox is a co...

PL-670

Overview This motor with integrated 48 CPR (counts per revolution) quadrature encoder is intended as a replacement low-power (LP) 12 V motor w...

PL-3260

This motor with integrated 48 CPR (counts per revolution) quadrature encoder is intended as a replacement low-power (LP) 12 V motor with encoder fo...

PL-4880

Overview This motor with integrated 48 CPR (counts per revolution) quadrature encoder is intended as a replacement low-power (LP) 6 V motor wi...

PL-2280

Discontinuation notice These dual axis gyros have been discontinuned. We recommend the L3GD20H 3-axis gyro as an alternative. Overview Th...

PL-1266

Discontinuation notice These dual axis gyros have been discontinuned. We recommend the L3GD20H 3-axis gyro as an alternative. Overview Th...

PL-1270

Overview This board is a compact (0.4″ × 0.8″) carrier for ST’s LPS25H MEMS absolute pressure sensor, or barometer; we therefore recommend car...

PL-2724

OverviewThis board is a compact (0.4″ × 0.8″) carrier for ST’s LPS25HB MEMS absolute pressure sensor, or barometer; we therefore recommend careful ...

PL-2867

Overview This board is a compact (0.4″ × 0.9″) carrier for ST’s LPS331AP MEMS absolute pressure sensor, or barometer; we therefore recommend c...

PL-2126

Discontinuation notice These dual axis gyros have been discontinuned. We recommend the L3GD20H 3-axis gyro as an alternative. Overview Th...

PL-1267

Discontinuation notice These dual axis gyros have been discontinuned. We recommend the L3GD20H 3-axis gyro as an alternative. Overview Th...

PL-1271

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LSM303D e-compass module, a single IC featuring a 3-axis digital linear a...

PL-2127

Note: This board has been replaced by the newer LSM303DLHC carrier, which offers improved magnetic sensing resolution and a wider acceleration mea...

PL-1250

Discontinuation notice: This board has been replaced by the newer LSM303D carrier, which offers several improvements over this product, including ...

PL-2124

Discontinuation notice: This board has been replaced by the newer LSM303D carrier, which offer improved magnetic sensing resolution, a wider accel...

PL-1273

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LSM6DS33 inertial module, which features a 3-axis digital linear accele...

PL-2736

The m3pi expansion kit gives 3pi robot users a convenient way to upgrade the functionality of their robots by adding more features, enabling the u...

PL-2152

Please see the mbed NXP LPC1768 development board and m3pi robot product pages for more information.

PL-2153

PL-1067

PL-1967