SparkFun

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to mak...

SF-DEV-14346

The LilyPad ProtoSnap Plus Kit is an all-in-one e-textile prototyping kit that has been specifically designed to make it as easy as possible t...

SF-DEV-12922

The LilyPad ProtoSnap Plus Kit is an all-in-one e-textile prototyping kit that has been specifically designed to make it as easy as possible t...

SF-LAB-14529

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure ...

SF-DEV-13903

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that...

SF-DEV-13343

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a b...

SF-DEV-13735

The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series of introdu...

SF-KIT-13927

The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series of introdu...

SF-KIT-14628

The full-color LilyPad Sewable Electronics Kit Guidebook contains step-by-step instructions for creating four interactive projects from the materia...

SF-BOK-14270

The LilyPad Simblee BLE Board is a wearable development board that allows you to add mobile application functionality via Bluetooth Low Energy (BLE...

SF-DEV-13633

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide...

SF-DEV-11893

The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken ...

SF-DEV-10940

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each bo...

SF-DEV-09350

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 d...

SF-DEV-08777

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any co...

SF-DEV-08467

This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built ...

SF-DEV-14631

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. T...

SF-DEV-11008

The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them with a little “conn...

SF-DEV-12921

The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s ...

SF-DEV-10899

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad senso...

SF-DEV-11364

The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it ea...

SF-DEV-11590

This is a four-pack of omni-directional antennas and cables that have been assembled to be specifically used with the LimeSDR. Each of these antenn...

SF-WRL-15028

The LimeSDR Mini development board is a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF design...

SF-WRL-15029

This is a two-pack of omni-directional antennas that have been assembled to be specifically used with the LimeSDR Mini. Each of these antennas cove...

SF-WRL-15030

These linkages use 6-32 screw rod (not included) to create custom arms for just about any application. They have a ¼" free-moving ball (with a 0.14...

SF-ROB-12277

LinkM is a USB adapter that addresses two of the most frequently-requested BlinkM features. It enables you to program BlinkMs without setting up a ...

SF-COM-09903

Every super spy has a small compact camera at their disposal just to get the advantage on the bad guy and though you may not be a “00” this high re...

SF-SEN-12804

Are you a super spy trying to spot ninja assassins in the dark? Or maybe you’re just trying to figure out who’s been sneaking to the kitchen at nig...

SF-SEN-11610

The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder...

SF-PRT-10255

The eTape Liquid Level Sensor from Milone Technologies is a great way to measure the level of a liquid. It has a resistive output that varies with ...

SF-SEN-10221

Do you have some liquids that you need to move? This fluid pump will move 350 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V, 1....

SF-ROB-10455

This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a sm...

SF-PRT-11855

This is a very small, extremely light weight battery based on Lithium Ion chemistry. This is the highest energy density currently in production. Ea...

SF-PRT-13853

No, these aren’t some sort of weird, AA battery, this is actually a 18650 Lithium Ion Cell. These round high capacity cells have been mainly used i...

SF-PRT-12895

This is the same 18650 Lithium Ion Cell that you know and love, but now includes pre-attached solder tabs! These round high capacity cells have bee...

SF-PRT-13189