dfrobot

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis’s the clearanc...

DF-ROB0055-4M4E

This Rover 5 Tank kit is based on Rover 5 tank platform. It is powered by our popular Romeo Controller (Arduino Compatible) and can be wirelessl...

DF-ROB0062

This is a circular flexible thin film pressure sensor of long legs with a diameter of 18.3mm, which can be used to realize highly sensitive detecti...

DF-SEN0295

This is a circular flexible thin film pressure sensor of short legs with a diameter of 18.3mm, which can be used to realize highly sensitive detect...

DF-SEN0294

This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detectio...

DF-SEN0298

This is a circular flexible thin film pressure sensor of short legs with a diameter of 7.6mm, which can be used to realize highly sensitive detecti...

DF-SEN0297

This is a long flexible thin film pressure sensor with a length of 170mm, which can be used to realize highly sensitive detection of pressure. The ...

DF-SEN0293

This is a long flexible thin film pressure sensor with a length of 400mm, which can be used to realize highly sensitive detection of pressure. The ...

DF-SEN0299

This is a square flexible thin film pressure sensor of short legs with a side length of 40mm, which can be used to realize highly sensitive detecti...

DF-SEN0296

The DFRobot Mobile Tank Base is the perfect low-cost tank base to help you build your mobile robot. The two DC motors included with the platform...

DF-ROB0007

FEATURESAPPLICATIONSSPECIFICATIONSNote: It has been newest Model: A1M8 --2017/5/15 DOCUMENTS SLAMTEC Website Development Kit SDK & Datasheet...

DF-DFR0315

RPLIDAR A2 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 4000 samples of ...

DF-DFR0445

The RPLIDAR A2M6 adopts the low cost laser triangulation measurement system developed by SLAMTEC, which makes the RPLIDAR A2 has excellent performa...

DF-DFR0584

  FEATURES     APPLICATIONS     Obstacle Avoidance Autonomous Mapping Route Planning Navigation    SPECIFICATION     Model: RPLDIAR-A3 Distance ...

DF-DFR0583

Portable TOF Laser Range ScannerTOF, 40m Ranging Radius, Outdoor Available, Enclosed Cover, LightweightTOF Ranging MethodRPLIDAR S1 adopts TOF(Time...

DF-DFR0616

This is a simple RS232 to RS485 converter that is self powered using the TX, RX or RTS, CTS signals for power. The RS232 is DB9 female connector, ...

DF-TEL0038

This industrial-grade RS232 shield from DFRobot is specially designed to expand one RS232 port(D-Sub, 9Pin, male) for LattePanda V1. With the chara...

DF-DFR0734

An industrial-grade RS485 shield for LattePanda! It is designed to expand a reliable RS485 interface(OPEN4) for LattePanda V1. The receiving and se...

DF-DFR0684

This RS-485 Sensor Node module can be used in various applications such as intelligent agriculture, environment monitoring,home automation...etc...

DF-DFR0233

Arduino RS485 is an industrial standard for long distance, anti-interferrence and reliable communication. So we create this RS485 Arduino shie...

DF-DFR0259

This is a high-precision industrial-grade RS485 temperature and humidity sensor. It uses high-quality digital integrated transducer and reliable di...

DF-SEN0438

This is a quality pack for indoor robots especially our Home Care Robot platform, comes with 12V Low noise DC Motor 146RPM, Encoder and Rubber W...

DF-KIT0085

This rubber wheel is used in our popular 4WD mobile platforms. It can be mounted directly onto micro gear motors, but also compatible with our m...

DF-FIT0336

INTRODUCTION This is a DFRobot desgined black wheel for mobile robots. After testing more than 6 different rubbers on...

DF-FIT0252

This wheel is used in our most popular A4WD Mobile Platform and 2WD Arduino Mobile Robot Platform. Mounted directly on micro gear motors. Sol...

DF-FIT0003

This is the new version of the Sabertooth 2x10 motor controller. The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual...

DF-DRI0003

The Sabertooth 2X25 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered ro...

DF-DRI0004

Sabertooth 2X5 is the motor driver of choice for small differential-drive robots. It is ideal for smaller robots- up to 3lbs in combat or 25 lbs...

DF-DRI0012

The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable an...

DF-DFR0060