SparkFun

The Serial Fiber Modem combines a CH340C USB-to-Serial bridge with a fiber receiver and emitter pair from Industrial Fiber Optics and it is the eas...

SF-SPX-17508

Serial flash chips are everywhere and they're as useful as they are ubiquitous. If you've never used a serial flash device in your own projects, yo...

SF-SPX-17115

Serial flash chips are everywhere and they're as useful as they are ubiquitous. If you've never used a serial flash device in your own projects, yo...

SF-SPX-17116

The W25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins, and power. This small SMD IC series of...

SF-COM-15809

The µLCD-144-G2(GFX) is a compact and cost effective display module using the latest state of the art LCD (TFT) technology with an embedded GOLDELO...

SF-LCD-11377

The uOLED-96-G2(GFX) is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with ...

SF-LCD-11315

The µOLED-128-G2 is a compact display module from 4D Systems using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embe...

SF-LCD-11676

The Serial Radio Telemetry Kit is a small, lightweight, and inexpensive open source radio platform that can allow for ranges of better than 300m ou...

SF-WRL-17255

The µLCD-32PTU is a compact Intelligent Display Module from 4D Systems packed with plenty of features, ready to become the GUI for your project, an...

SF-LCD-11677

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec H...

SF-ROB-09065

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver ...

SF-ROB-10189

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maxi...

SF-ROB-11965

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts a...

SF-ROB-09347

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of max...

SF-ROB-10333

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of max...

SF-ROB-14760

This is one of the smallest servos we carry but don’t let its size fool you, the HS-35HD is a durable and strong little servo thanks to its Metal-K...

SF-ROB-11882

This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 ...

SF-ROB-11884

This is the versatile Hitec HS-425BB servo. This little guy is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16sec/60°, this...

SF-ROB-11883

This is one of the smallest servos we carry, but don’t let its size fool you! The HS-5035HD is the digital version of the popular HS-35HD and is de...

SF-ROB-14210

This powerful motor is the Hitec HS-625MG servo. This is one of the strongest metal gear servos that is available and at a great price. The HS-625M...

SF-ROB-11885

This unique motor is the Hitec HS-646WP servo. What separates this servo from the rest is that it is waterproof with a IP67 (Ingress Protection-67)...

SF-ROB-11886

This powerhouse is the Hitec HS-755HB servo. Able to take in 6 volts and deliver an impressive 183 oz-in. of maximum torque at 0.23 sec/60°, this i...

SF-ROB-12625

This beast is the Hitec HS-805BB servo. Able to take in 6 volts and deliver an impressive 343 oz-in. of maximum torque at 0.14 sec/60°, this is a h...

SF-ROB-11881

This is the epitome of the phrase “appearances can be deceiving,” and trust us, with the Hitec HS-85MG that couldn’t be more true. The HS-85MG is a...

SF-ROB-11887

These aluminum double servo arms have a length of 2.685”, a width of 0.25”, and utilize the 0.77” hub pattern that can connect directly to your C1 ...

SF-ROB-12546

These aluminum single servo arms have a length of 1.53”, a width of 0.25”, and utilize the 0.77” hub pattern that can connect directly to your C1 H...

SF-ROB-12388

This “boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable b...

SF-ROB-12272

This “non-boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cab...

SF-ROB-12176

This is a 12 inch servo extension cable that comes in handy when your servo is further away from the controller than the wire on the servo allows. ...

SF-ROB-15808

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a ...

SF-ROB-12440

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a ...

SF-ROB-12184

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 12 teeth with a g...

SF-ROB-12258

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a g...

SF-ROB-12389

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a g...

SF-ROB-12142

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 24 teeth with a g...

SF-ROB-12341

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 32 teeth with a g...

SF-ROB-12231

These lightweight servo hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These al...

SF-ROB-12291

These lightweight servo hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These alu...

SF-ROB-12543

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs ...

SF-ROB-12274

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs h...

SF-ROB-12443

These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your 3F Futaba servo spline. These aluminum servo hubs have a...

SF-ROB-12480

These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your C1 Hitec servo spline. These aluminum servo hubs have a ...

SF-ROB-12227

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your...

SF-ROB-12330

This servo plate provides a mounting ring for your ¼-sscale servo. Four 6-32 tapped holes hold the servo in place, while 12 holes surrounding the p...

SF-ROB-12200