SparkFun

NOTE: THIS SOLDERING IRON IS HAS A US PLUG AND IS NOT COMPATIBLE WITH AUSTRALIAN POWER OUTLETS.This is a very simple fixed temp, quick heating, 30W...

SF-TOL-09507

This adjustable-temperature soldering iron is a great tool for when you don’t want to break the bank but need a reliable iron to get the job done. ...

SF-TOL-14456

This is a simple soldering iron stand composed of a heavy-duty metal base and a reinforced spring holder. The base and holder are detachable. A cir...

SF-TOL-09477

This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a bevel type of soldering tip. Replacing the tip is very easy - si...

SF-TOL-10719

This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is the chisel type of soldering tip that comes with the Hakko. Replac...

SF-TOL-10720

This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a conical type of soldering tip. Replacing the tip is very easy - ...

SF-TOL-10721

This is a replacement soldering tip for our 30W Soldering Iron. This is a conical type of soldering tip, and is the same version that originally co...

SF-TOL-09538

This is an ET Series replacement soldering tip for the Weller WE1010 soldering station. Each conical-type tip measures 0.02" (0.6mm) wide. Replacin...

SF-TOL-14737

This is a replacement soldering tip for the Weller WLC100 soldering iron. Each conical-type tip measures 0.031" (0.79mm) wide. Replacing the tip is...

SF-TOL-14231

This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a flat type of soldering tip, measuring 0.125" (3.17mm) wide. Repla...

SF-TOL-14230

This is an ET Series replacement soldering tip for the Weller WE1010 soldering station. It is a “screwdriver” type of soldering tip, measuring 1/16...

SF-TOL-14735

This is an ET Series replacement soldering tip for the Weller WE1010 soldering station. It is a single flat type of soldering tip, measuring 1/8" (...

SF-TOL-14736

This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a standard type of soldering tip, measuring 0.062" (1.58mm) wide. R...

SF-TOL-14229

Does controlling door and cabinet access with the power of Electromagnetism interest you? Excellent! In effect, this latch / lock solenoid is an el...

SF-ROB-15324

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. According to the datasheet this solenoid...

SF-ROB-10391

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to wor...

SF-ROB-11015

A solid state relay (SSR) allows you to control high-curent AC loads from lower voltage DC control circuitry. Solid state relays have several advan...

SF-COM-13015

The Sony Spresense extension board is a board which extends the interfaces compared to the Spresense main board. The Spresense extension board has ...

DF-DFR0680

These simple 24AWG wires are terminated with a female insulated spade connector at one end and a braided wire lead at the other. Each wire is 3 fee...

SF-CAB-14166

Under-powering a digital device can sometimes have pretty nasty consequences. Brown-out conditions can cause memory to get written or overwritten i...

SF-KIT-11087

Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your micr...

SF-BOB-13601

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liqu...

SF-LCD-14072

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Cr...

SF-LCD-16396

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liqu...

SF-LCD-14073

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Cr...

SF-LCD-16397

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liqu...

SF-LCD-14074

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Cr...

SF-LCD-16398

The NCP1402 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries) and output...

SF-PRT-10967

Sometimes you need a very small directional input device (world’s smallest game controller, anyone?) This 5-way tactile switch (up, down, left, rig...

SF-BOB-11187

The NCP1402 is a 5V DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low ripple 5V outp...

SF-PRT-10968

The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due...

SF-BOB-13303

The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted...

SF-SEN-13339

This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 MEMS gyro. With this board, you get a full 6 degrees of freedom. The senso...

SF-SEN-10121

4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem b...

SF-COM-11442

4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem b...

SF-COM-11440

4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem b...

SF-COM-11441

4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem b...

SF-COM-11629

The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete with a ...

SF-SEN-15335

The LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine deg...

SF-SEN-13284