Sparkfun

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all maj...

SF-WIG-09555

This is a simple 5V Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets...

SF-BOB-09816

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge...

SF-KIT-13778

The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog ca...

SF-DEV-13712

The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressur...

SF-DEV-16832

The SparkFun OpenLog with Headers is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. T...

SF-DEV-13955

The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. Passive infrared (PIR) sensor...

SF-SEN-13968

The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to read multiple types of ...

SF-SEN-13261

We love 7-segment displays and we know you do too, so we have made the easiest (arguably) to use medium for you to get up and running and use! This...

SF-DEV-13190

This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or ...

SF-BOB-09118

The SparkFun Papa Soundie is an audio playback device breaking out VS1000D audio codec IC allowing this little board the ability to decode OGG...

SF-DEV-14554

Welcome to the world of paper circuits - creating electronic projects directly on paper using simple components! The SparkFun Paper Circuits C...

SF-KIT-14715

Welcome to the world of paper circuits - creating electronic projects directly on paper using simple components! The SparkFun Paper Circuits Classr...

SF-KIT-15818

Welcome to the world of paper circuits - creating electronic projects directly on paper using simple components! The SparkFun Paper Circuits Kit t...

SF-KIT-14655

Welcome to the world of paper circuits - creating electronic projects directly on paper using simple components! The SparkFun Paper Circuits Kit te...

SF-KIT-15817

The SparkFun MAX30105 Particle Sensor is a flexible, powerful sensor enabling sensing of distance, heart rate, particle detection and even the blin...

SF-SEN-14045

When you’re working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles, the tools of the trade....

SF-TOL-11640

One ruler to rule them all. This is a basic 12 inch ruler, but made from a PCB. We have included a lots of useful information on each side of the r...

SF-TOL-15295

A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connection...

SF-BOB-09322

The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optica...

SF-SEN-16474

The SparkFun Photon Battery Shield provides you with an easy way to power your Photon module with a Lithium Polymer (LiPo) battery. Not only can th...

SF-DEV-13626

You can’t have any development board without some sort of prototyping area, the SparkFun Photon ProtoShield takes care of this. This ProtoShield ma...

SF-DEV-13598

The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. It’s easy to...

SF-DEV-13321

The SparkFun Photon Wearable Shield makes it easy to add the WiFi-enabled Photon to any wearables project. Each pin on the Photon is broken out int...

SF-DEV-13842

The SparkFun Photon Weather Shield is an easy to use add-on board that grants you access to barometric pressure, relative humidity, and temperature...

SF-DEV-13630

The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative humidity, and temperature...

SF-DEV-13674

The SparkFun Pi AVR Programmer HAT makes it easy to program AVRs directly from the SPI hardware pins on any Raspberry Pi. It was originally design...

SF-DEV-14747

The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connec...

SF-DEV-14328

This is the SparkFun Pi Wedge, a small board that connects to the Raspberry Pi’s 26-pin GPIO connector, and breaks the pins out to breadboard-frien...

SF-KIT-12652

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-f...

SF-BOB-13717

This is the SparkFun Pi Wedge B+, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi B+, and breaks the pins out to bread...

SF-KIT-13091

The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interact...

SF-WIG-11888

Do you own a Raspberry Pi? Have you always wanted to use it to set up your very own gaming station? The SparkFun PiRetrocade provides you with all ...

SF-KIT-14007

The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. The board comes with a JST connector for a...

SF-PRT-11231