Adafruit

"Whoa! Is that a credit-card sized computer inside a sleek, hot-chili red body?" they'll all be saying, head's turned toward your Raspberry Pi. "It...

AF-1984

"Blimey! There's a flotilla off the port bow! Man the crow's nest and batten down the mizzenmast," we yelled when a box of these came in.  Then we ...

AF-2619

Robe your A+ in royal purple with this Pibow Royale Enclosure for the Raspberry Pi Model A+!The Royale Pibow is a majestic violet case for your Ras...

AF-2296

This works on the Raspberry Pi Model B ONLY! It does not work on the Raspberry Pi Model B+! Upgrade your Raspberry Pi PiBow enclosure with this 're...

AF-1320

Crafted out of four transparent acrylic pieces the Pibow Zero Case for Raspberry Pi Zero protects your Pi while showing it off to the world!Each la...

AF-3005

Crafted out of four transparent acrylic pieces, the Pibow Zero W Case for Raspberry Pi Zero W protects your Pi while showing it off to the world!Ea...

AF-3471

For PIC fans, or anyone who wants a dev board with a little more horsepower under the hood, the PIC32 Pinguino presents a step up from Arduino. Thi...

AF-469

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, conne...

AF-160

This thin silvery ribbon is an interesting sensor. It's made of 2mm wide by 600mm long piezoelectric film sandwich. Piezo film can be used to detec...

AF-4931

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spa...

AF-1003

This is the Custom Gamepad PCB for the PiGRRL 2 pack! The board is designed for use in portable gaming projects like the PiGRRL 2 but it's basicall...

AF-3015

For all those who feared their Game Boy days would be but a memory, worry no more! The Game Boy may be dead, but with this pack you'll have a chanc...

AF-3014

For all those who feared their Game Boy days would be but a memory, worry no more! The Game Boy may be dead, but with this pack you'll have a chanc...

AF-2355

This is the custom Gamepad PCB for the PiGRRL Zero Parts Kit! We've dramatically cut the build time in half of the PiGRRL Zero pack by making this ...

AF-2934

A high-power, reliable, USB 2.0 hub ideal for the Raspberry Pi® Fast, Fiesty and Fruity - Comes with a US-plug 5V 3A power supply, plenty of powe...

AF-1516

PiJack is a HAT (yes, a proper HAT, not a pHAT!) add-on board for the Raspberry Pi Zero mini computer that makes connecting your Pi Zero to the Int...

AF-3374

If you have a Raspberry Pi LoRa project using our fancy 8-Channel LoRa HAT you want enclosed, and need something extra durable, this enclosure is a...

AF-4283

If you have a Raspberry Pi LoRa project using our fancy 8-Channel LoRa HAT you want enclosed and need something extra durable, this enclosure is ab...

AF-5057

Do you need a solution for home automation, hydroponics, light industrial automation, and other related predicaments? Take control of and monitor y...

AF-3289

Do you need a solution for home automation, hydroponics, light industrial automation, and other related predicaments? Pimoroni's Automation pHAT – ...

AF-3352

Jam-packed with analog and digital inputs, outputs, and a relay, Pimoroni's automation:bit is the perfect micro:bit add-on for controlling smart ho...

AF-3936

These sewable badges are unbearrrrrably cute. Bearables is Pimoroni's range of woodland-themed wearable LED badges and sensors. String 'em with con...

AF-3745

These sewable badges are unbearrrrrably cute. Bearables is Pimoroni's range of woodland-themed wearable LED badges and sensors. String 'em with con...

AF-3744

A nifty little breakout from our friends at Pimoroni that lets you access all of the GPIO pins while also running a HAT on your Raspberry Pi Model ...

AF-2339

Snap the Pimironi Blinkt! on top of a Raspberry Pi Zero, or any Raspberry Pi with a 2x20 connector, for a fun 1x8 RGB LED matrix powered directly f...

AF-3195

Pimoroni's Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible!Pimoroni's SHIM-format boards...

AF-3582

A stylish and super slim (7mm) 3x16 character display with 3 RGB backlights for flair from our friends at Pimoroni. On the PCB there's a handy 9-se...

AF-2287

The Pimoroni Display-O-Tron HAT is an upgraded HAT version of our Display-O-Tron 3000!The Display-O-Tron is a lovely 16x3 character LCD display wit...

AF-2694

Raspberry Pi and Pimoroni Piano HAT have found a new musical companion!With the Pimoroni Drum HAT you can play music in Python, control software dr...

AF-3180

Care about air with Enviro+ FeatherWing. It's packed full of environmental sensors that'll get you started in the world of citizen science. Monitor...

AF-4674

Ideal for monitoring conditions in your house, garage, and more, the Pimoroni Enviro pHAT packs 4 different sensors, letting you measure temperatur...

AF-3194

Be your own meteorologist or cobble together a cool, dynamic weather science project with Pimoroni's enviro:bit for micro:bit!This add-on board is ...

AF-3830

The Explorer HAT is a terrific prototyping side-kick for your Raspberry Pi 2, B+, or A+!On the Explorer from Pimoroni there are a heap of useful in...

AF-2426

The Explorer HAT Pro is a terrific prototyping side-kick for your Raspberry Pi 2, B+, or A+!On the Explorer Pro from Pimoroni there are a heap of u...

AF-2427

The Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi. Based on Pimoroni's popular Explorer Hat Pro, this is a smaller cheap...

AF-3018

Looking for another way to keep your Raspberry Pi cool? Hook up Pimoroni's miniature 5V Fan SHIM and prevent your hard-working Pi from overheating!...

AF-4316

AHOY, wanna spell out some LOVE with this COOL Raspberry Pi FOUR letter PHAT? Pimoroni's Four Letter pHAT has four 14-segment displays that you can...

AF-3475

Pimoroni's GFX HAT is a shiny new LCD Display with RGB Backlight and Touch Buttons! This is a seriously snazzy LCD that can display complex graphic...

AF-3935

Make a gorgeous video set up with this high-resolution 10", IPS, 1024x768, plug-n-play HDMI screen kit with a display driver board that's perfect f...

AF-4337

Make a gorgeous video set up with this high-resolution 8", IPS, 1024x768, plug-n-play HDMI screen kit with a display driver board that's perfect fo...

AF-4338

Pimoroni's HyperPixel features a 3.5" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and respons...

AF-3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and respons...

AF-3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels. The plate uses the high speed DPI interface on the Pi and can use t...

AF-3932

What's that, you say? Pimoroni has another new super sweet tri-color e-paper display? Oh feast your eyes! This Inky pHat in Yellow/Black/White is a...

AF-3933

Here at Adafruit we never tire of cool, new displays, so these super sweet e-paper displays really caught our eye! Pimoroni's Inky pHat is a petite...

AF-3934

Here at Adafruit we never tire of cool, new displays, so these super sweet tri-color e-paper displays really caught our eye! Pimoroni's Inky pHat i...

AF-3743

In the beginning there was Inky pHAT, a triumvirate of eInk bonnets from Pimoroni. And now, Pimoroni has upped their electronic paper displays to 4...

AF-4142