SparkFun

RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. Th...

SF-BOB-00716

This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The Spark...

SF-BOB-13021

The SparkFun Roshamglo is the new and fun way to play Rock-Paper-Scissors with your friends! The board uses the ATtiny84, and has an IR LED and rec...

SF-KIT-14130

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to stan...

SF-BOB-11722

This is the SparkFun Rotary Switch Breakout, a very simple board designed to easily provide you access to each pin on our 10-position rotary switch...

SF-BOB-13098

The SparkFun Rotary Switch Potentiometer Breakout is a small board the allows you to add resistors to a 10-position rotary switch, turning it into ...

SF-BOB-13099

The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice vers...

SF-PRT-00449

The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice vers...

SF-PRT-08780

The SparkFun RTK Surveyor is an easy to use GNSS receiver for centimeter-level positioning. Perfect for surveying, this preprogrammed device can al...

SF-SPX-17369

Is your laptop covered in stickers that hide the dents? Do you put your equipment through its paces? The SparkFun 1 meter Rugged microB cable is de...

SF-CAB-14742

Introducing the Semi-Horned Oblong Versatile Eating Ladle, or as we like to call it, the S.H.O.V.E.L. This is not your run-of-the-mill spork (foon)...

SF-TOL-11763

These were really nice safety glasses. Then we decided to completely ruin them and slap the geek logo on there. Don’t worry, it doesn’t impair your...

SF-SWG-11046

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing spot. The...

SF-DEV-13672

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. Th...

SF-DEV-13664

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/M...

SF-BOB-12941

Do you have a good understanding of various sensors or need a variety of them for a project? This kit includes a sensor for just about every job. W...

SF-DEV-13754

Do you have a good understanding of various sensors or need a variety of them for a project? The SparkFun Sensor Kit includes a sensor for just abo...

SF-DEV-16156

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge...

SF-KIT-13094

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. W...

SF-DEV-15096

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and s...

SF-DEV-14050

The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that’s been designed to drive small DC motors with ease. The SCMD is design...

SF-ROB-13911

The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is eas...

SF-ROB-09571

The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a black on green...

SF-LCD-09066

The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a white on black...

SF-LCD-09067

The SparkFun Serial Enabled LCD Backpack allows you to control a parallel based LCD over a single-wire serial interface. The SerLCD backpack takes ...

SF-LCD-00258

Calling this the “Serial Enabled LCD Kit” doesn’t do justice to how cool it actually is. After you’ve assembled this all-PTH kit, you’ll be left wi...

SF-LCD-10097

This is a smaller version of our serial graphic LCD. The SparkFun Serial Graphic LCD backpack is soldered to the 128x64 pixel Graphic LCD and provi...

SF-LCD-09351

The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner vi...

SF-DEV-15316

The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal ...

SF-WIG-13118

The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an externa...

SF-WIG-13872

This is a breakout for the SOIC version of the 74HC595 shift register IC. Clock in data and latch it to free up IO pins on your micro. All pins fro...

SF-BOB-10680

The SN74HC165N is a neat little IC that will take an input of up to 8 parallel lines and produce a single, serial output. It’s a great way to incre...

SF-BOB-11733

This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. Note: This breakout board was originally designed fo...

SF-BOB-00573

The SparkFun Simblee BLE Breakout board is a programmable board that allows you to add mobile app functionality via Bluetooth Low Energy (BLE, or B...

SF-WRL-13632

Our Surface Mount Stenciling Simon Says kit is a great challenge to anyone with intermediate skills at soldering resulting in a pretty fun toy that...

SF-KIT-12961

This is the latest version of the Simon SMD soldering kit, the surface mount version of our popular Simon Kit. It’s considered an intermediate kit ...

SF-KIT-10935

This is the latest version of our popular through-hole Simon Says Kit. We’ve made some changes to the board that should make it easier than ever fo...

SF-KIT-10547

This thru-hole soldering kit is very similar to our Simon Says; First, it’s a great way to learn how to solder; second, it’s a fun game to play; an...

SF-KIT-12634

The SparkFun Simultaneous RFID Reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Frequency Identifi...

SF-SEN-14066

Breakout board for the low power, single axis ADXL193 MEMS accelerometer. The ADXL193 is a high-g sensor with a full scale range of ±250g! The ADXL...

SF-SEN-09332

The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical ...

SF-SEN-12650

Get all the small components you may need all in one little box! The SparkFun Small Parts Kit includes all the bric a brac pieces that are valuable...

SF-KIT-14819

Sometimes it’s nice to have a protoboard that’s super long and skinny, super small, or just a bunch of holes. The SparkFun Snappable Protoboard is ...

SF-PRT-13268