pololu

Overview The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. T...

PL-3132

Kits include: Preprogrammed ATtiny13 with tinyCylon firmware Printed circuit board (PCB) 5 red LEDs Pushbutton switch Battery holder wit...

PL-769

This heavy duty single-pole, double-throw (SPDT) toggle switch makes a great power switch or state selector for user interfaces. It is rated for ...

PL-1407

Overview The Texas Instruments TPS2113A autoswitching power multiplexer allows you to switch seamlessly between two power sources of 2.8 V to ...

PL-2596

Overview This protective enclosure for the Raspberry Pi Model B+, Pi 2 Model B, and Pi 3 Model B consists of two pieces: a base that the Raspberry...

PL-2754

Traveling Nut for TR8×8(P2) Threaded Rod. When the nut is prevented from rotating, it travels up or down the rod as the motor rotates. ...

PL-2688

These tweezers have fine tips suitable for small surface mount (SMT) parts. They are made of corrosion-resistant, anti-magnetic stainless steel th...

PL-1628

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-2166

This servo extension cable has three 22-AWG wires joining a male Futaba J connector and a female JR connector. Since a female JR connector can be...

PL-2169

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-2167

This servo extension cable has three 22-AWG wires joining a male Futaba J connector and a female JR connector. Since a female JR connector can be...

PL-2168

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-2165

This 12" (300 mm) Y-cable has female JR connectors on all three ends, so it can be used to make connections between devices with 0.1" 3-pin male h...

PL-2164

This 12" (300 mm) Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single f...

PL-2163

Overview The uLog is a tiny analog-logging device with a 3.3V TTL serial interface. Central to the logger is an Atmel ATtiny24 mated with an A...

PL-1622

Note: CH Robotics has discontinued the UM6 r2 and replaced it with the newer and higher-performance UM7 orientation sensor. Overview The UM6 ...

PL-2723

Discontinuation Notice: This module has been replaced by the UM6 r2. The new version is functionally identical to the original UM6 and can be use...

PL-1255

Discontinuation Notice: This module has been replaced by the UM7-LT. Overview The UM6-LT ultra-miniature orientation sensor—also known as an ...

PL-1256

Overview Note: A new manufacturer (Redshift Labs) has taken over making and supporting the UM7. They have released new versions of the UM7 and UM...

PL-2741

Overview August 2018 update: We are transitioning to shipping units with firmware version U72B, which offers numerous improvements including more ...

PL-2764

Overview August 2018 update: We are transitioning to shipping units with firmware version U72B, which offers numerous improvements including more ...

PL-2763

Overview USB 2.0 Type-C Connector Breakout Board, bottom view with dimensions. The USB Type-C connector is intended to supersede a wide rang...

PL-2585

The USB Type-C connector is intended to supersede a wide range of existing USB connectors. It is reversible and can serve in both USB host and USB ...

PL-3411

This adapter features a USB Type-A plug on one end (the kind you would plug into a computer) and a USB Mini-B plug on the other. It has the same ...

PL-1126

Discontinuation notice: This product has been replaced by a 6’-long version. USB A to Micro-B cable size comparison: standard cable (#1939) o...

PL-1939

USB A to Micro-B cable size comparison: standard cable (#2073) on left, thin cable (#2072) on right. This USB cable is six feet long (1.8 m)...

PL-2073

This retractable USB cable can be extended up to a length of three feet and has a male, type-A connector and a male, mini-B connector. It is u...

PL-1130

This USB cable is five feet long (1.5 m) and has a male Type-A connector and a male Mini-B connector. 

PL-1315

USB cable size comparison (product #1129 on left, #130 on right). This USB cable is six feet long (1.8 m) and has a male Type-A connector an...

PL-130

This USB expansion board from CH Robotics allows the UM7 and UM7-LT Orientation Sensors to be connected to your computer using the included 5-pin ...

PL-2742

USB Micro-B connector breakout board, bottom view with dimensions. This board breaks out the VBUS, GND, D-, D+, and ID pins of a USB Micro-B...

PL-2586

Note: This original (usb04b) version of our USB Micro-B Connector Breakout Board has been replaced by a newer (usb04d) version. The new version ha...

PL-2592

USB Mini-B connector breakout board, bottom view with dimensions. This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B co...

PL-2593