Jaycar

This module measures the reflectivity of a surface with an infrared emitter/detector pair. The output goes to high whenever the reflectivit...

TB-XC4474

This tiny module charges a single lithium cell from a 5V supply. Ideally paired with XC-4512 DC-to-DC Converter Module to create a device t...

TB-XC4502

While most of the modules used in the Arduino® world are 5V logic, some are 3.3V. And unfortunately, connecting them directly often results...

TB-XC4486

The Arduino Compatible Long Range LoRa shield turns your Arduino into a LoRa node capable of transmitting and receiving data over long dist...

TB-XC4392

Our range would not be complete without a microphone sensor module. This unit is highly sensitive with the added advantage of having two ou...

TB-XC4438

With self-adhesive tape on the back, ideal for DIY projects including Arduino®. It has 17 holes x 10. Total 170 holes. It can also be perma...

TB-PB8817

A tiny Arduino compatible 128 x 64 pixel OLED display. Monochrome graphics with wide viewing angle and I2C interface.  * ...

TB-XC4384

This versatile board has 2 x 5V servo ports connected to the Arduino's high-resolution dedicated timer to ensure jitter-free operation. It ...

TB-XC4472

A full featured MP3 module that supports both playback and recording. An onboard microphone is used for audio in, and a 3.5mm jack provides...

TB-XC4516

Measure light levels with this sensor module. This module uses a light dependant resistor to produce an output voltage that varies with lig...

TB-XC4446

A pyroelectric infrared PIR motion sensor is a handy addition to any Arduino® project. Wide operating range and delay times changeable via ...

TB-XC4444

This stackable shield makes semi-permanent prototyping simple. When you want something more permanent than a breadboard, but don’t want to ...

TB-XC4482

Add another dimension to your Arduino weather project. This compact module can be used to detect rain, and can be separated into a sensor a...

TB-XC4603

This tiny little module will keep accurate time using a button battery; the CR2032 battery is easily replaceable. Great to use with all of ...

TB-XC4450

Add sound to your Arduino without the complexity of MP3 modules and SD cards, using the ISD1820 based Record and Playback Module. Includes ...

TB-XC4605

Need a red laser light for your latest project? Here it is! Everything you need to drive the laser diode is included on the board. Just con...

TB-XC4490

This module adds a versatile 433Mhz radio to your DuinoTECH project. Capable of transmitting and receiving over a wide frequency range, the...

TB-XC4522

This RFID module allows you to both read and write MiFare-Type RFID cards. Create your own contactless security lock. Include one credit-ca...

TB-XC4506

Using a 5050 RGB LED, by adjusting a PWM signal on the three primary colours the user can gain the full colour spectrum. This tiny module c...

TB-XC4428

Strip of eight RGB LEDs which can be controlled by a single Arduino pin. Up to 1000 LEDs can be daisy chained and run from one pin. ...

TB-XC4380

Features 5V and 3.3V power inputs and resistors to allow safe on either IO voltage.   * Push-pull style SD Card Socket ...

TB-XC4386

This shield makes connecting 3-pin analogue sensors a snap. Each of the 6 DuinoTECH analog inputs is broken out to individual 3-pin connect...

TB-XC4452

Automate your garden with Arduino and use the Soil Moisture Sensor Module to detect when your plants need watering. Features: * Ana...

TB-XC4604

Using the powerful L298N Dual Motor Driver, this module allows full control of two DC Motors or one stepper-motor. Features back-EMF and ov...

TB-XC4492

Create a smarter line-following robot with the Triple Infrared Reflectance Sensor Module. The module has three evenly spaced sensors and mo...

TB-XC4611

This module will measure the UV light and adjust the output voltage depending on the UV intensity. Capable of measuring over a wide spectra...

TB-XC4518

This handy module gives you X & Y axis control for your Arduino project. The board is interfaced through 5 pin header and provides a sm...

TB-XC4422

Break out your XBee compatible boards to the standard 2.54mm header spacing. Ideal for the XC4600 GPS Bee. Features: * Pins marked ...

TB-XC4608

The Yun Shield is a complete compact Linux computer based on the Open WRT firmware which can be controlled by your Arduino Main Board. It f...

TB-XC4388

Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side ...

TB-MP3146

This book guides you through the construction of 7 robots that roll, walk, talk, slither and even sling insults at you. All projects featur...

TB-BM7136

Build a stackable shield, or make your current shield stackable with the Duinotech Stackable Headers. Alternatively, shorten the pins to ma...

TB-HM3208