Sparkfun

Screw plates make it easy to create a strong joining point between our channel pieces. The round screw plate is nearly 1" around, has 8 6-32 tapped...

SF-ROB-12456

If you’re looking for a chassis base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with a hall...

SF-ROB-10336

The RPLIDAR A2 is the next generation of 360 degree 2D LIDARs. Each RPLIDAR A2 can take up to 8000 samples of laser ranging per second thanks to it...

SF-SEN-14756

The RPLIDAR A3M1 is the next generation of 360 degree 2D LIDARs. Each RPLIDAR A3 can take up to 16000 samples of laser ranging per second thanks to...

SF-SEN-15045

The RPLIDAR S1 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 9200 samples of...

SF-SEN-15872

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordi...

SF-WRL-09232

The ‘must have’ IC for 3V projects. This is the RS232 converter IC that is capable of running at 3V and communicating with 3V logic. Comes in an ea...

SF-COM-00589

As you know, the Arduino micro controller only has a USB port and a TTL UART interface, so if you need an RS232 port directly connected to your Ard...

SF-DEV-13029

Our friends over at LinkSprite have made this nifty little RS485 Shield, now you will be able to have a communication port for your field bus direc...

SF-DEV-12965

Our friends over at LinkSprite have made this nifty little RS485 Shield V3 for the Raspberry Pi, now you will be able to have a communication port ...

SF-DEV-13706

These lipped Rubber Rings have an inner diameter of 1.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement ...

SF-ROB-12343

These lipped Rubber Rings have an inner diameter of 2.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement ...

SF-ROB-12403

These lipped Rubber Rings have an inner diameter of 3.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement ...

SF-ROB-12549

These lipped Rubber Rings have an inner diameter of 4.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement ...

SF-ROB-12233

These lipped Rubber Rings have an inner diameter of 5.65", a width of ¼", and a sturdy rubber sidewall. These rings can be used as a replacement fo...

SF-ROB-12278

  The Scanse Sweep 3D Scanner Kit is an advanced 60-piece DIY kit that gives you everything you need to assemble a 3D scanner using your Scanse Sw...

SF-KIT-14482

The CD40106BE consists of six Schmitt-trigger circuits. Each circuit functions as an inverter with Schmitt-trigger action on the input. The trigger...

SF-COM-13952

Schottky diodes are known for their low forward voltage drop and a very fast switching action. This 1A 40V Schottky diode is ideal for use with mot...

SF-COM-10926