Sunfounder

Specifications Inside diameter: 5mm Base outside diameter: 12mm Chassis height: 5mm Overall Height: 13mm Knurled bottom diameter: 6mm Knurled groov...

SU-GEARWHEEL

Suitable for RC Plane, wire connection, solder joint protection, wire ends of the harness, electronics protection and insulation treatment, metal p...

SU-SHRINKABLETUBE

Specifications Suitable for: Remote Control Aircraft Model number: 2MM Color: Gold

SU-BANANACONNECTOR

Technical Details 1. Precisely machined from high quality Acrylic. 2. Made for Raspberry Pi Model B. 3. Raspberry Pi is not included.

SU-1000C2RASPBERRYPICL

Specification Weight: 80g Color: Black Application: Cutting Specifications: 125 mm Model Number: TGK-A01 DIY Supplies: Electrical Material: Chrome ...

SU-TGK-A01CUTTINGPLIERS

Specifications： Item Name: LED Night Light Suitable for: Remote Control Aircraft Color: White, Red, Green Material: aluminium alloy + LED  Input Vo...

SU-LED

Features 13.3 Inch FULL HD Raspberry Pi Screen with 1920*1080 Resolution, supports key operation, using ips panel screen with 72% color gamut supp...

SU-CN0147-S

Specification Type: Mini Pliers Item model number: 170-II  Material: Stainless Steel  Application: Cutting  Weight: 50g Description The 170-II flu...

SU-MICROCUTTER

The SFX190 kit is an X-shaped quadcopter designed for aircraft hobbyists for FPV racing. It features stability, agility, and activity. No matter in...

SU-X190PLUS

Technical DetailsIntroductionThis is a 5V 2-Channel Relay interface board, Be able to control various appliances, and other equipments with large c...

SU-2CH5V

Test Environment StandardEvery characteristic of the inspect must be normal temperature and humidity carry out the test,temperature 25±5℃ and relat...

SU-SF0180SERVO

Introduction  These types of gloves uses polyester filament and conductive fiber of high performance. Designed for use in particularly sensitive an...

SU-ANTI-STATICGLOVES

Specification Weight: 15g Size: 54x23x23mm Introduction Rosin flux is a special material used to remove the oxide film, also known as flux. Since ...

SU-COLOPHONY

Introduction The SF210 multirotor aircraft kit is tailored for the hobbyists for FPV flying. It runs the Nazeflight32, which is developed ...

SU-SF210

IntroductionThe kit is normally used in aircrafts, Arduino and Raspberry Pi related products. With good fixing performance and multiple types, it’s...

SU-SCREWSKIT

SpecificationColor: BlueModule: TGK-8060BMaterial: Plastic & AluminumWorking power: 60WWorking voltage: 220VWorking temperature: 210℃-230℃（410℉...

SU-GLUEGUN

Features: GPIO expansion kits, contains 2 pieces 26-pin GPIO Cable GPIO Extension Board Breadboard is NOT included Raspberry Pi is NOT included Tec...

SU-26-PINGPIOBREAKOUTEXPA

Introduction  Phototransistor, or photo triode, is a photoelectric conversion component that senses the light intensity. The stronger light, the la...

SU-TS0471

Introdction This USB to TTL serial adapter module can work with different types of computer systems and drivers. The power LED, TXD LED and RXD LED...

SU-TS0486

Features3.5 Inch Touch Screen Monitor with high definition, designed for Raspberry Pi. 480 x 320 resolution ratio, supports touch control.Compatibl...

SU-3.5LCDSCR

Suitable for: Remote Control Aircraft Model number: 3.5MM Color: Gold Weight: 0.290kg Package Including: 1x Banana Plug Connector Male 1x Banana P...

SU-BANANAPLUG

This 3.7V 1-12P micro parallel board battery charging panel is suitable for helicopter lipo batteries. It supports both Micro JST 1.25 and JST-PH 2...

SU-CHARGINGBOARD

This is a 3.7V high energy density Li-Po battery, weighing 10.8g with a mini size of 38x20x8mm. It comes with a rated capacity of 380mAh – a chargi...

SU-380MINIBATTERY

Specification + Philips: PH000, PH00, PH0, PH1  - Straight Screwdriver (Slot Type): 1.5, 2.0, 2.5, 3.0mm Inner Hex: H1.3mm, H1.5mm, H2.0mm, H3.0mm,...

SU-31IN1SCREWDRIVER

This NEW Sensor Kit V2.0 for Raspberry Pi is a revision based on the previous version Sensor Kit for Raspberry Pi. Most of the experiments are the ...

SU-RPI2SENSORV2

Note: Due to the difference between different monitors, there is some differences in color between picture and real subject, please refer to the re...

SU-38IN1SCREWDRIVER

Introduction  The power module is designed for the Raspberry Pi 3 Model B specially, allowing the master board to work offline for up to 9 hours. I...

SU-BATTERYPOWERPACK

Package list 1x CNC Shield V3.0     1x uno R3 board     4x A4988 driver     1x USB cable

SU-A4988DRIVERBOARDKIT

Introduction Integrate 2560 with ramps1.4 on only one board, removing the messy wiring of Ramps1.4 combined ports. The motor drive is changeable; s...

SU-MKSGENV1.2

Package list 1 x Control panel MKS Gen V1.2 5 x DRV8825 driver 1 x USB cable

SU-MKSGENV1.2KIT5

Specification Model Number: MKS Gen V1.2  Package list 1 x MKS Gen V1.2 5 x A4988 with the radiator 1 x USB  cable

SU-MKSGENV1.2KIT

Introduction It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an SunFounder Meg...

SU-SHIELDRAMPS1.4

Specifications Material : Aluminum Plate Voltage : 12V/24V Max Temperature : 110 Degree Celsius Package Weight : 500g Color : Red Package list 1 x...

SU-HEATEDBED

Package list 1x CNC Shield V2.0 1x Uno R3 board 3x A4988 driver 1x USB cable

SU-BOARDKIT

Specification Color: Silver  Material: Stainless Steel  Caliper Type: Digital Calipers  DIY Supplies: Metalworking  Model Number: YWL960TE  Measure...

SU-VERNIERCALIPER

Power: 3W Voltage Support:12V - 24V Light Color:Warm White/Pure White Optional Lampcup Outer Diameter:20mm Total Lenght(with cable):250mm Plug Type...

SU-SEARCHLIGHT

SpecificationThis is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current.It can be...

SU-TS0011

Suitable for: Remote Control Aircraft Height: 150mm Weight: 90 grams Color: Black,White Package Includes: 4pcs universal Tall Landing gear skids ...

SU-F450TLG

IntroductionThis is a 4-channel HIGH level trigger relay, applicable to Arduino and Raspberry Pi, Relays are suitable for driving high power electr...

SU-5V4CH-RED

Package list: 1x 40-pin GPIO Cable  1x GPIO Adapter for Raspberry Pi B+

SU-40-PINGPIOEXTENSIONBOA

Unique PIP Function and Front-facing Camera 1) In any mode , tap the <CAM> button to enable the front-facing camera function. Then there will...

SU-40CHFPVGOGGLES

Description:  The solder material is composed of tin, lead and a variety of chemical activator synthesis. It will produce toxic ingredients when we...

SU-SMOKEABSORBER

Small and lightweight, the 7x20mm coreless motors are perfect for building customized micro and nano FPV quadcopters. It boasts a rated revolution ...

SU-720MOTOR

The propellers with 0.95mm mounting hole can be firmly mounted onto 1mm 4-axial motors. Their smooth surface can greatly decrease the wind resistan...

SU-PROPELLER

Protection Mount for 1806/2204 series: Net weight(4pcs):8g Colour:Red,Black,Green Package Include 4pcs x Motor Protection Mounts

SU-MOTORPROTECTION

IntroductionDesigned for Raspberry Pi, the 5 inch HDMI display screen monitor holds a resistive touch screen with a resolution of 800x480. It suppo...

SU-5HDLCDSCR

Specification Model: MTC-3 Specifications: 5-inch 125mm Shear capacity: soft iron wire: 1.6mm copper wire: 2.0mm Material: carbon steel for mechani...

SU-DIAGONALPLIERS

Note: This item don't support TF card. 5.8GHz Receiver Features: Sensitivity: -90dBm±dBm 40 Channel(5 Band X 8 Channel) Antenna Port: 1*SMA Effect...

SU-654480VG