Light up your Arduino and Raspberry Pi display needs with this high resolution, full colour OLED display module! Perfect for graphics, gauges, graphs, even make your own interactive display.
Features
- 16,384 full colour RGB pixels in a 128 x 128 format.
- Rear mounted MicroSD card, accessible directly on the Arduino.
- Active display area 28.8 x 26.8 mm, (1.5 inch diagonal.)
- Removable mounting tabs with "wings" where you can mount optional LEDs and buttons.
- Simple interface with Arduino compatible library, graphics and text functions plus examples.
Recommended Options
- OLED Shield LCD Adaptor for Eleven and compatible boards
- OLED Stick LCD Adaptor for LeoStick
- PiScreen LCD Adaptor for Raspberry Pi
Resources
- OLED128 QuickStart Guide for Arduino
- OLED 128 QuickStart Guide for Raspberry Pi
- OLED128 LED & switch wing guide
- FTOLED Arduino Library & FTOLED Wiki
- Discuss in the forum
- Hardware schematic PDF
- Dimensioned drawing PDF (original Inkscape SVG file)
- Controller datasheet (SSD1351)
- Design files
Examples
Customer Creations
Specifications
Power Supply Voltage (VCC) | 3.3V-5.5V. Recommended 5V. |
Logic Input Voltage (logic pins) | 3.3V and 5V logic compatible (independent of VCC.) |
Absolute Maximum Voltage |
7V (VCC or any digital input pin.) |
Digital Output (MISO pin from Micro SD slot) |
3.3V logic. |
Power Consumption
Unlike LCD displays, OLED displays use less power the less pixels are lit up.
Measurements taken with VCC = 5V, room temperature, default brightness and contrast settings.
Display |
Current Consumption | Power Consumption |
All black | 4mA | 20mW |
"fonts_demo" example sketch | 26mA | 130mW |
"lorem_ipsum" example sketch | 72mA | 360mW |
"sprite" example sketch | 7mA | 35mW |
All white | 165mA | 825mW |
All red | 99mA | 495mW |
All green | 88mA | 440mW |
All blue | 113mA | 565mW |