Click or scroll to zoom
Tap or pinch to zoom
We can get 2178 units into Australia from Jaycar. If you order today, we can dispatch this stock between Nov 30, 2024 - Dec 05, 2024.
With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Power rating is 0.5W max. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is a generous 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.Value 25K
| Potentiometer Diameter | 24mm |
| Log or Linear? | Linear |
| Potentiometer Knob Type | Imperial D |
| Potentiometer Terminal Type | PCB mount |
| Potentiometer Shaft Length | 38.5mm |
| potentiometer nut size | 24mm(3/8inch 32THD) |
| Passive marking code | Number code |
| Passive number of legs | 3 |
| Component package | Metal can |
| Passive connector type | Solder Legs |
| Passive mount type | Panel,Through Hole |
| Pack Quantity | 1pc |
| Resistance level | 25kΩ |
| Continuous Power | 0.5W |
| AC Voltage rating | 150V |
