9 Degrees of Freedom - Razor IMU

Name: 9 Degrees of Freedom - Razor IMU
Brand: DFRobot
SKU: DF-SEN0073
Price: 338.1 AUD
Availability: InStock

via DFRobot

$338.10

SKU DF-SEN0073

Quantity

This Razor IMU is Discontinued Now, We recommend IMU Sensors as a suitable replacement. The 9DOF Razor IMU incorporates four sensors - an LY530AL (single-axis gyro), LPR530AL (dual-axis gyro), ADXL345 (triple-axis accelerometer), and HMC5883 (triple-axis magnetometer) - to give you nine degrees of inertial measurement. The outputs of all sensors are processed by an on-board ATmega328 and output over a serial interface. With the work of Jordi Munoz and many others, the 9DOF Razor can become an Attitude and Heading Reference System. This enables the 9 DOF Razor to become a very powerful control mechanism for UAVs, autonomous vehicles and image stabilization systems.

The board comes programmed with the 8MHz Arduino bootloader and example firmware that tests the outputs of all the sensors. Simply connect to the serial TX and RX pins with a 3.3V FTDI Basic Breakout, open a terminal program to 57600bps and a menu will guide you through testing the sensors. You can use the Arduino IDE to program your code onto the 9DOF, just select the 'Arduino Pro or Pro Mini (3.3v, 8mhz) w/ATmega328' as your board.

The 9DOF operates at 3.3VDC; any power supplied to the white JST connector will be regulated down to this operating voltage. The output header is designed to mate with our 3.3V FTDI Basic Breakout board, so you can easily connect the board to a computer's USB port. Or, for a wireless solution, it can be connected to the Bluetooth Mate or an XBee Explorer.

SPECIFICATIONS

9 Degrees of Freedom on a single, flat board:
ITG-3200 - triple-axis digital-output gyroscope
ADXL345 - 13-bit resolution, ±16g, triple-axis accelerometer
HMC5883 - triple-axis, digital magnetometer
Outputs of all sensors processed by on-board ATmega328 and sent out via a serial stream
Autorun feature and help menu integrated into the example firmware
Output pins match up with FTDI Basic Breakout, Bluetooth Mate, XBee Explorer
3.5-16VDC input
ON-OFF control switch and reset switch
Dimensions: 1.95 x 1.10 " (49.53 x 27.94 mm)