Overview
The DS0201 is the Original design of DSO Nano (the same as DSO Nano in v1.1), and the latest version hardware of this pocket oscilloscope is v1.6. DS0201 (DSO Nano) is a compact digital oscilloscope based on an ARM Cortex™-M3 compatible 32 bit platform. The DSO is equipped with a 320x240 color display, microSD card capability, USB connection, and rechargeable LiPo battery.
The DS0201 is easy-to-use and has a number of useful functions. It has a 1MHz sample rate, which isn't huge, but should do the job for most hobbyist use. The measurements are displayed on a 65,000 color, 2.8", 320x240 TFT color LCD. Other specifications include up to 10mV/Div and 1us/Div sensitivity, 80Vpp max input voltage, and a 1Msps 12Bits max sample rate. Waveforms can also be saved to a FAT16 formatted microSD card.
Features
- Super portable and lightweight
- 2.8" color 320*240 display
- Micro SD card Waveform Storage
- Basic 1 Msps sample rate with 12bit resolution
- Various measurement markers
- Various trigger mode
- Build-in test signal
- USB chargeable battery
- Open source
Specification
- Display: 2.8″ Color TFT LCD
- Display Resolution: 320×240
- Display Color: 65K
- Analog bandwidth: 0 - 1MHz
- Max sample rate: 1Msps 12Bits
- Sample memory depth:4096 Point
- Horizontal sensitivity: 1uS/Div～10S/Div (1-2-5 Step)
- Horizontal position: adjustable with indicator
- Vertical sensitivity:10mV/Div～10V/Div (with ×1 probe), 0.5V/Div～100V/Div (with ×10 probe)
- Vertical position: adjustable with indicator
- Input impedance: >500KΩ
- Max input voltage: 80Vpp (by ×1 probe)
- Coupling: DC
- Trig modes: Auto, Norma, Single, None and Scan
- Functionalities:1)Automatic measurement: frequency, cycle, duty, Vpp, Vram, Vavg and DC voltage, 2)Precise vertical measurement with markers, 3)Precise horizontal measurement with markers, 4)Rising/falling edge trigger, 5)Trig level adjustable with indicator, 6)Trig sensitivity adjustable with indicator, 7)Hold/run featureTest signal Built-in: 10Hz～1MHz (1-2-5 Step)
- Waveform storage: SD card
- PC connection via USB: as SD card reader
- Upgrade: by bootloader via USB
- Power supply: 3.7V Chargeable Lithium battery / USB
- Dimension (w/o probe): 105mm X 53mm X 8mm
New features compared with v1.6 hardware
- Connectors are added between 2 PCB board
- Modified the circuit layout of inputting part
- Using thin-film keypad, not need the gasket any more
- MCX precision plug probe is used
Features of latest firmware v2.5
- Modified the pattern of background coordinate grid
- Correct the grammatical errors in the boot prompt information
- Changed UI mode of operation: use right or left button to select the menu, up and down keys to change the menu option
- Added "FIT" adaptive function for scan synchronization mode: 1)automatically select the scan time according to the signal frequency; 2)automatically select the sensitivity of Y-axis according to the signal amplitude
- Without SD card, you can press both "p" and "M" button to automatically save the current state as the boot state
- Save as BMP files
- When AUTO, the M can cancel the comparison waveform
Package List
- DS0201(DSO Nano)v1.6 X1
- Probe X1
- 700mA Lithium battery X1
- Mini USB cable X1
