Click or scroll to zoom
Tap or pinch to zoom
We can get 400 units into Australia from Jaycar. If you order today, we can dispatch this stock between Nov 30, 2024 - Dec 05, 2024.
This heatsink is designed to mate with itself to form a tunnel. The heatsink extrusion has screw flute centre to enable 4 x No.6 self- tapping screws to fasten an 80mm standard type fan on one (or both) end/s to drive air through the heatsink assembly. It is ideal for high power amplifiers and power supplies. The entire assembly, including fan/s can still fit inside a 2 x Rackunit (88mm) enclosure. The heatsink also features ribbed fins for extra surface area, a 4mm thick base to enable thread tapping and small vee grooves on 5mm centres to facilitate mounting hole location. The centre groove, for example, is directly below the middle fin.
Thermal Characteristics:
Assembly Type Cooling Mode Rating (approx)
Single Length Convection 0.83° C/W
Tunnel Assembly Convection 0.70° C/W
Tunnel Assembly Fan Assisted (single) 0.35° C/W
Tunnel Assembly Fan Assisted (dual) 0.30° C/W
Suitable fans are YX- 2512 (12V DC) or YX- 2510 (240V AC).
Thermal Characteristics:
Assembly Type Cooling Mode Rating (approx)
Single Length Convection 0.83° C/W
Tunnel Assembly Convection 0.70° C/W
Tunnel Assembly Fan Assisted (single) 0.35° C/W
Tunnel Assembly Fan Assisted (dual) 0.30° C/W
Suitable fans are YX- 2512 (12V DC) or YX- 2510 (240V AC).
| Heatsink Layout | Fan |
| Heatsink Thermal Resistance | 0.83°C/W |
| Heatsink Fins | 2pc |
| Sink Area Width | 254mm |
| Component Mount Area Height | 84mm |
| Cooling Fan Mount Size | 84mm |
| Heatsink Mounting Method | Screw Down |
| Length | 254mm |
Warranty: 3 Months
